Call 01493 277103

Lead roofing

Lead Flashing Alternatives

Lead flashing is not the only way to seal a roof junction. GRP, zinc, synthetic strips and mortar fillets are all used, and each has limits. This guide sets out where an alternative suits and where lead is still the sound choice.

Get a written quote

Call 01493 277103WhatsApp us

Roofers fitting a grey porch canopy roof on a brick house

What a flashing has to do

A flashing is the strip sealing the junction between a roof and something that sticks up through or against it: a wall, a chimney, a dormer cheek, a roof window or a change of slope. The roof covering cannot be taken right up to the wall, because the two move at different rates. The flashing bridges that gap, sheds water over the junction and lets both sides move.

Any material that replaces lead has to do the same four things. It must be waterproof, it must be bendable enough to follow a stepped brick course or a curved dormer, it must move with the temperature without tearing, and it must hold its shape and fixings through weather for decades. Judging an alternative starts with how well it does those four, not with how it looks on the first day.

Lead does them well, which is why it has stayed in use. It is dense, so it lies where it is put, it is soft enough to be dressed into awkward shapes, and it does not rust. The reasons people look away from it are specific: the cost of the metal, the risk that thieves take it, a detail where lead is hard to form, or a wish for a different appearance. Those reasons point to different alternatives, so it helps to name yours before choosing.

Is lead still the right answer

In many places it is. MyJobQuote says correctly installed lead flashing can last for over 80 years, and the same page says the figure runs past 100 years for higher codes. Leadworx, a lead flashing maker, lists codes 3 to 8 under BS EN 12588 and says code 4 has become the standard choice for general flashing work. A roof that is expected to outlast several coverings is a fair case for a metal with that record.

Lead is also the material a conservation officer may expect to see kept on an older building. On a listed home, changing the flashing material is not a like-for-like repair, and listed building consent is needed where the work would affect the building's character. The listed buildings and roof repairs guide covers that route.

Where lead is doubtful is a short list. A roof that has already lost lead to theft and is easy to reach again; a junction so tight that lead will not dress without tearing; a structure that cannot carry the weight, since lead is heavy; or a budget where the metal's price outweighs its life. Each of these has an alternative, and none of them means lead is a poor material on a roof that suits it.

If your reason is cost, ask for a quote for lead and for the alternative on the same roof, and set them side by side. MyJobQuote's lead prices cover chimney leadwork alone, so they cannot settle a comparison here. Each option has to be priced from the survey as its own written total.

Myth

Anything that looks like lead flashing will last as long as lead.

Fact

Look-alike strips are different materials; their lives depend on the product.

GRP and fibreglass details

GRP is glass-reinforced plastic: layers of resin and glass mat that set hard in place. It is used for flat roof coverings, for valleys and for trim details, and it can be formed into shapes that lead would struggle with. Because it is built on site as one piece, it has no joints to open in the way a lead roll does.

HomeBuilding gives a GRP flat roof 25-30 years and Less says GRP lasts 25 to 40 years with minimal maintenance. Those are figures for the covering, published by two sources that do not agree, and neither is a life for a flashing detail. A flashing is the most movement-prone part of a GRP roof, and a rigid resin trim where it meets a wall has to be designed to take that movement.

The guide on lead valley replacement is a good place to see the comparison on one detail. A GRP valley and a lead valley both drain a junction between two slopes; the difference is how each handles movement and repair. A lead valley can be cut open and patched. A GRP valley is repaired by laying new glass and resin over a prepared surface, and the new layer has to bond to the old one.

GRP is not a metal, so it does not attract the same theft risk. It does not take the shapes that lead does without moulds or careful trimming, and it does not look like lead, which matters on a building where the original lead is part of the character.

Zinc, copper and other metals

Zinc and copper are sheet metals like lead, and they can be bent, folded and fixed in similar ways. VMZinc, a maker, says "When correctly designed and installed a zinc roof can last in excess of 100 years." That is the maker's claim for a whole zinc roof, and it is stated here as theirs. Zinc is stiffer than lead, so it is folded into seams, not dressed round, and it suits straight runs better than tight angles.

Our lead flat roofs guide describes the joint system that lead needs. Zinc and copper use their own, with folded seams that allow the sheet to move. The skill is in the folding, and a metal flashing that has been bent in the wrong places will crack at the fold as readily as lead does.

Aluminium is another sheet metal used for flashings and trims. It is less workable than lead round awkward shapes and it has its own expansion rate, so the detail must allow for that. Life figures for aluminium and copper come from their makers, and each maker's number should be read as that maker's own claim for its own product.

Theft is the point where metal alternatives differ. Lead can be stolen from a roof, and other metals can be taken too. If theft is the reason for looking away from lead, a different metal does not remove the reason, and a non-metal flashing may suit better on a building that has been targeted.

Synthetic flashings, strips and mortar

Synthetic flashing strips are rolled products with a bonded or backed surface, made to be pressed into place and sealed. They are quick to fit and light, and they dress round a shape without the skill that lead needs. They are used on a wide range of roofs, and makers publish their own life claims. We name none here, since each maker's figure belongs to that product and should be read from its own data sheet.

What a roll product cannot do is the job lead does on a long run of stepped brickwork, where the flashing has to be chased into the wall and last. These strips can be stuck to a surface, and stuck work depends on the surface staying sound. If the wall behind it crumbles or the pointing opens, the strip can lift with it.

Mortar is the last option and the weakest as a flashing. A mortar fillet, a sloped bead of cement along a junction, was once how roof edges were sealed. It cracks as the roof and the wall move apart, because mortar is rigid. Marley says that since the 2015 amendments mortar "could no longer be relied upon as the only means of securing the roof covering", a statement about fixings, but the same logic applies to a mortar junction: it is a poor choice where movement is expected.

Sealant has the same problem. A line of mastic is a short-term seal and a way of delaying the proper repair. The types of lead flashing guide explains which details can be done in lead and which are better done another way.

Lead against a synthetic strip

Lead

  • Dressed to any shape
  • Chased into the wall
  • Free to move at joints
  • Metal, so a theft target

Synthetic

  • Quick to fit
  • Stuck to a surface
  • Needs a sound wall
  • Life set by the maker

Questions to settle before choosing

Choosing between lead and an alternative is easier once the questions are written down, and it saves a second visit.

Take the life question seriously, because it is the one people skip. A flashing that lasts a few years on a roof with decades left in it means the junction is opened again, the tiles beside it lifted again and the whole cost met twice. A longer-lived material can cost more on the day and less across the life of the roof, and the survey can say how much life is left in the covering around the junction. The list below holds what a survey would settle for your roof, and several of the answers can be seen from the ground.

Each answer narrows the options. A listed building leads you back to lead. A theft problem points away from metal. A tight curve points toward a material that can be formed on site, such as GRP. A long run of stepped wall points toward a flashing that can be chased in and left to last. A question about weight goes to a structural check, using the figures on each product's own sheet.

A photo sent on WhatsApp helps with the first few questions, since the junction, the wall and the old flashing all show in one picture. We then survey the roof in person, take in all of it and say what else we noticed, before any material is priced. Say at that point which of the questions matter most to you, so the comparison is built around them and not around a default.

Questions that decide the material

  • Is the building listed or in a conservation area?
  • Has lead been stolen from this roof before?
  • How tight is the angle the flashing must follow?
  • Is the wall behind it sound enough to chase?
  • Can the roof structure carry heavy lead sheet?
  • What life do you need from this detail?

How the choice affects the quote and the consents

The written quote is one total price, and it names the material for each junction so you can see what is being used where. Where you are weighing two materials, say so at the survey, and the quote can price both in the same way, so the comparison is fair and neither is flattered by a different scope of work. The amount of flashing, how easy the roof is to reach and what condition the wall is in decide the figure.

For a conservation area, the question is whether the change affects the appearance of the building from the street. Ask the council that before the material is chosen, because a change that looks small on paper can still be visible from the pavement. For a listed home, it is the character test in the law: listed building consent is needed for works "in any manner which would affect its character as a building of special architectural or historic interest". The council or the Broads Authority, inside its executive area, decides, so check with them before a material is changed.

The lead roofing and leadwork page links every lead guide, so you can read on into any single detail, with the sourced chimney figures, what they cover and what they do not.

Questions and answers

Is lead flashing still worth choosing?

Yes, on a roof that suits it. MyJobQuote says correctly installed lead flashing can last for over 80 years, and Leadworx calls code 4 the standard choice for general flashing work. The alternatives win on specific points such as theft, shape or weight, and each of those is something the survey can check on your roof.

Can I swap lead for a synthetic strip on a listed home?

No, not as a like-for-like repair. Listed building consent is needed where the work would affect the building's character, and the council decides. Check with the council before any material is changed, and expect the answer to depend on the building, how visible the junction is and what the council's conservation officer says.

Does zinc work better than lead round a chimney?

Zinc is stiffer than lead, so it suits straight runs better than the tight steps and corners round a stack. VMZinc says a zinc roof that is correctly designed and installed can last in excess of 100 years, but that is a claim about a whole roof and its maker, not about a flashing round a chimney.

Will switching metal stop lead theft?

No. Other metals are taken from roofs too. If theft is the worry, a non-metal flashing may suit that roof better, and the survey can compare each junction on your roof and price every option as one written total, so the decision follows the junctions rather than a general preference.

Get a written quote

Tell us about your roof

Hand dressing a lead ridge roll with a wooden bossing stick

10-year workmanship guarantee, in writing

Call WhatsApp Written quote