The short answer
Match the gutters to the windows and fascias you already have: white with white uPVC, black with dark frames or traditional iron. Both colours show dirt in different ways. In a conservation area or on a listed home, check with the council before changing colour, because the look of the street is its concern.
Matching the colour to the house
Colour is the first thing anyone sees on the roofline, so the starting point is what is already there. Look at four things together:
- The window frames, whose colour the gutters will sit beside.
- The front door and any painted timber.
- The fascia and soffit boards, which frame the gutter.
- The walls, brick or render, behind the whole run.
White gutters sit naturally with white uPVC windows and white fascias, because the whole eaves then reads as one clean line. Black gutters suit dark grey or black window frames, and they are the traditional colour for cast iron, so they look right on a period house with painted timber windows. A black gutter against a white fascia can work, but it draws the eye to the gutter line, so the choice should be deliberate.
Downpipes should match the gutter, and the gutter and fascia do not have to match each other. White boards with black gutters, or black boards with black gutters, can both look settled. A square of colour sample held against the wall, in daylight, shows more than a brochure swatch does. Look at the house from across the road, since that is the view the colour has to work from.
How each colour wears
Neither colour stays as it was on the day it was fitted. White plastic can yellow as it ages in the weather, and a retailer of uPVC roofline products puts correctly installed performance at between 20 and 40 years, which says nothing about how white it stays. Green algae shows clearly on white, while grey dust and pale limescale show on black.
A wash with warm water and a mild detergent lifts what settles on either colour, as our guide to cleaning uPVC fascias sets out, and it is a better habit than leaving dirt to bake on. Strong solvents dull the finish on both.
Aluminium is painted at the factory, so its colour lasts as long as the coating does. Cast iron is painted on site, and the paint needs renewing to protect the metal. The choice of material is therefore part of the colour question, and our page on uPVC against aluminium guttering goes through it.
Dirt also collects differently on a ribbed or ogee front than on a plain half-round, so the profile can change how quickly a colour looks tired, and a gutter high above a path is seen less than one over a front door.
Conservation areas and listed homes
Where a home is in a conservation area, the look of the street is the council's concern. GOV.UK says an Article 4 direction lets the Secretary of State or the local planning authority take specified permitted development rights away across a defined area. Ask the council whether one covers your address, and for any part inside its executive area ask the Broads Authority.
A listed building needs listed building consent for work that would touch its character, and a change of gutter colour or material can be judged to do that. Black iron is the traditional match for a period house, and the council can confirm what it accepts.
Whatever the answer, ask before ordering. A reply that says the existing colour can be kept, or that a change is acceptable, is worth having in writing. Our page on cast iron guttering covers the traditional black material.
Photographs of the existing gutters, with the colour named or a paint reference noted, make the enquiry easy to answer. A request that says only that you want to change colour gives the council less to decide on, and a request to keep what is there is the simplest to approve.
Practical points before you order
Colour names differ between makers, and the shade of white or black on one brand will not match another. Replacing a single length with a different make leaves a visible patch, so order the full set of gutters, stop ends, joints and downpipes from the same range. Painted gutters from a hardware shop age differently from factory-coated ones, and a tin of paint on old plastic does not last.
Colour does not appear as a line in the published price averages. MyJobQuote's UK average for a gutter replacement is around £1,000 to £1,600 (20 October 2026), and the material, the length and the access move a figure more than the shade does. The written quote is one total price after the survey.
Look at the fascia behind the gutter too: a new colour on a rotten board is a short-lived improvement. The guttering, soffits and fascias hub links to the pages on boards, soffits and ventilation. A matching colour also needs matching fixings and screws.


