Call 01493 277103

Commercial roofing

CDM 2015 on Commercial Roof Work

CDM 2015 applies to a business roof repair as much as to a new build, and the business that commissions the work is the client. This guide covers what that means, how it differs from a homeowner's position and what a construction phase plan holds, within commercial roofing.

Get a written quote

Call 01493 277103WhatsApp us

Grey dry verge units along the gable of a concrete tile roof

What CDM 2015 covers on a roof

CDM 2015 is the short name for the Construction (Design and Management) Regulations 2015, the rules that govern health and safety on construction work in Great Britain. Construction work here means more than building a new structure. It takes in repair, maintenance, alteration and demolition, so replacing profiled sheets on a warehouse, relining a gutter or refitting a flat roof covering on a shop all fall inside it.

Roofs are a place where the regulations matter in practice. Falls from height and fragile surfaces account for serious injuries across the construction industry, and the CDM framework exists to make someone responsible for planning the work before it starts, rather than leaving every decision to whoever turns up on the day. The rules are enforced by the Health and Safety Executive, which publishes plain-language guidance for clients and contractors on its website.

The regulations name a set of roles. The client commissions the work. The contractor carries it out. Where a project has more than one contractor, a principal contractor takes charge of the construction phase, and a principal designer takes charge of the design and planning side before and during it. Workers and designers have duties of their own. The roles are about what a person does on the project, not their job title, so a roofer can be the contractor on one job and a subcontractor on the next.

For a business that is not used to commissioning building work, the starting point is the client role. It carries duties that cannot be handed to the roofer by default, and the next section explains how that differs from the position of a homeowner.

Domestic clients and commercial clients

HSE defines the domestic client in these words: "A domestic client is any individual who has construction work carried out on their home, or the home of a family member, that is not done as part of any business." A homeowner re-roofing a house is a domestic client. A landlord letting the house, a company with a roof over its offices and a hotel owner with a leaking guest house are not, because the work is done as part of a business.

The distinction matters because the regulations treat the two differently. Regulation 7 says a domestic client's duties "must be carried out by" the contractor where the project has only one, or by the principal contractor where it has more than one, or by the principal designer where there is a written agreement to that effect. In plain terms, a homeowner's duties pass to the contractor.

A commercial client's duties do not pass automatically. They stay with the business, and the business is expected to meet them or to arrange the project so they are met. A small company can find this surprising, because the roofer is the one holding the tools and it seems natural that the roofer carries the responsibility. The regulations say otherwise: the person with the power to decide what is built, when, by whom and with what budget has a duty to make those decisions sensibly.

The tenant and landlord question needs thought. The client is whoever has the work carried out, so a tenant who orders a repair to a roof they are responsible for can be the client, and a landlord who commissions work on a multi-let building can be. Where a managing agent places the order, agree in writing who holds the role. That written agreement saves an argument if something goes wrong on site.

Myth

The roofer takes over all the client's duties on a business roof.

Fact

That transfer is written for domestic clients; a commercial client's duties stay with the business.

What a commercial client has to arrange

HSE's client guidance sets out the commercial client's duties in a short list. The client makes suitable arrangements for managing the project, which includes allowing enough time and money for the work to be planned and carried out safely. The client gives the designers and contractors the information they need about the building, which the regulations call pre-construction information. Where more than one contractor is involved, the client appoints a principal designer and a principal contractor in writing. The client also makes sure a construction phase plan is in place before the construction phase starts, and that welfare facilities are provided on site.

For a roof, the pre-construction information is the part that most affects safety. It is everything the building's owner already knows that bears on the job: whether asbestos is present or suspected, which areas are fragile, where the roof lights are, what services run across the roof, how access works and whether the building stays occupied. Our fragile roof safety guide explains why the fragile areas matter so much.

The client also has a duty to check that the people appointed are able to do the job. That does not call for a certificate on the wall. It is a sensible question of whether the firm has done similar roofs, can explain how it will get on and off the roof safely and can describe how it will protect other people on the premises.

Notification is a separate point. Some larger projects must be notified to HSE before the construction phase begins, and HSE's guidance sets the test. A small roof repair falls well short of it, but the client is the person who checks.

Information a roofer needs from the client

  • Any asbestos survey or register for the building
  • Known fragile sheets, roof lights and old repairs
  • Plant, aerials and cables fixed to the roof
  • Who is on site while the work happens
  • Existing access routes, hatches and ladders
  • Hours the building is open and loading times

One contractor or several: who leads the job

The number of contractors decides who leads. HSE's guidance ties a domestic client's duties to the count: the contractor holds them when there is one, the principal contractor when there are several. The same count of contractors drives the appointments a commercial client makes. A roofing job can look like a single firm, but contractors under CDM include subcontractors, so a roofer who brings in a scaffolder, an electrician to isolate a circuit on the roof or a specialist for asbestos sheets is working on a project with more than one contractor.

A principal contractor is the firm that plans, manages and coordinates the construction phase, and it draws up the construction phase plan. A principal designer coordinates health and safety in the design and planning stage. On a roof repair, the roofer can take the principal contractor role, and the client or a surveyor may act as principal designer. The point is that the appointments are made and written down, so everyone knows who is in charge.

Scaffolding brings its own paperwork into the plan. The scaffold has its own permission where it stands on the pavement or road: we arrange the licence with our scaffolder, and Norfolk County Council issues it for Great Yarmouth. Because the licence takes time, it goes into the programme at the outset and not at the end.

The construction phase plan

However small the project, it has a construction phase plan. The regulations say so directly. Under regulation 15(5), the contractor on a project with one contractor "must draw up a construction phase plan, or make arrangements for a construction phase plan to be drawn up", and under regulation 12(1), "the principal contractor must draw up a construction phase plan" once the project has several contractors. The plan is proportionate: a short repair needs a short plan, and a large re-roof needs a longer one.

A plan for a roof project deals with the specific hazards of that building. It names the access arrangements and the edge protection, the fragile areas and how crossing them is controlled, the handling of any asbestos and the arrangements for people who are not part of the project. It covers storage for materials, welfare, emergency arrangements and how the work will be coordinated with the people running the building.

The plan is a working document. If the survey finds a failed roof light that was not in the information given, the plan changes. If the weather changes the order of the work, the plan changes. The client does not write it, but the client has a duty to make sure it exists before work starts, which means asking for it. A firm that cannot show one for your roof has not finished the planning.

From enquiry to a plan that is ready

  1. The client gathers what is known about the building.
  2. A survey checks the roof and adds what is found.
  3. Appointments are made where there is more than one contractor.
  4. The contractor or principal contractor drafts the plan.
  5. The client confirms it is in place before work starts.
  6. The plan is updated if the roof shows something new.

Running a roof job in a working building

A shop stays open, a guest house keeps its guests and a unit keeps its forklifts moving, so roof work on a business building carries a duty to people who are not on the project. Falling tools, dust, noise, exclusion zones under the roof edge and deliveries at the same door all need thinking about before the first sheet comes off. The plan records the answers, and the client shares what only the occupier knows: opening hours, delivery slots, fire exits and anywhere the public gathers.

Asbestos sits across all of this. HSE says: "If the building was built or refurbished before 2000, assume that there is asbestos in it." A business that manages premises has its own duty under the asbestos regulations to find out whether materials containing asbestos are present and to manage them. That register is the first document a roofer needs, because it decides how the sheets are handled and who may touch them.

Cost follows the planning. Price follows the survey: the roof, the way onto it and the findings set the figure, and the written quote states a single total. Read about commercial roof surveys to see what that visit covers, and if you want a view before booking one, WhatsApp a picture of the roof to 07880 284133.

Questions and answers

Does CDM 2015 apply to a small roof repair on my shop?

Yes. Construction work under CDM includes repair and maintenance, and a shop owner who commissions it is a client. The scale changes how much planning is needed, not whether the regulations apply. Every project has a construction phase plan, so a small job needs a short one, and the client is the person who asks to see it.

Who is the client if I rent the premises?

The client is whoever has the construction work carried out. A tenant who orders a repair to a roof they are responsible for can be the client, and a landlord who commissions work on a building let to several tenants can be. Where a managing agent orders the work, agree in writing who holds the role.

Can I hand all the CDM duties to my roofer?

Not as a commercial client. Regulation 7 writes the transfer for domestic clients, to the contractor or, on a multi-contractor project, to the principal contractor. A business client's duties stay with the business, which makes the appointments, supplies what it knows about the building and makes sure the plan exists.

What should a roofer show me before the work starts?

Ask to see the construction phase plan for your roof, and who is leading the project if more than one firm is involved. The plan should deal with access, edge protection, fragile areas, asbestos and the people in the building. If it does not mention those, ask why not before anyone goes up.

Get a written quote

Tell us about your roof

Hand dressing a lead ridge roll with a wooden bossing stick

10-year workmanship guarantee, in writing

Call WhatsApp Written quote