The short answer
HSE advises: "If the building was built or refurbished before 2000, assume that there is asbestos in it." On a commercial roof, cement sheeting is one material to check, and it is fragile. A survey and a sample settle what the roof is made of before any quote is written.
The pre-2000 rule and what it covers
Look at the second verb in HSE's sentence: built or refurbished. A unit put up in 1995 and a unit built in 1975 but re-roofed in 1998 both fall inside the rule. A later construction date does not clear a building that was only refurbished before 2000, because the refurbishment may have brought materials in.
For sheeting, the material HSE names is asbestos cement: the corrugated or flat sheets that cover a barn-style unit, a workshop or a lean-to. HSE's A14 guidance puts the danger in four words, "AC roofs are always fragile", and that holds whatever the age, colour or apparent condition of the sheets. Nobody should step onto one.
The legal duty to manage asbestos in a non-domestic building rests with whoever is responsible for maintaining it, and that is a separate subject from the roofing work. On the roof, the position is simple: until a sample says otherwise, an older sheeted roof is handled as one that may contain asbestos, and the plan for the job is built around that.
Which asbestos roof work is licensed
HSE sorts the work into three classes, and the material decides which one a job falls into.
- Non-licensed work covers asbestos cement products such as the sheeting itself and the rainwater goods, "provided the material is carefully handled/removed without breaking up". HSE says this includes asbestos cement which is weathered but not otherwise substantially damaged.
- Notifiable non-licensed work covers sheeting where the cement has been badly damaged or broken apart, with fire and flood damage given as HSE's examples.
- Licensed work covers work on asbestos insulating board (AIB) where the risk assessment shows it will run beyond a short duration, and short-duration AIB removal in a refurbishment is notifiable instead.
AIB matters on a roof because HSE lists "AIB white soffit panels to underside of roof eaves" and "Damaged AIB soffit" among the places where the board is found. A roof sheeted in cement can still carry AIB under its eaves, so the survey reads the soffit and any boards as well as the sheets themselves, and reports what it sees in each.
Overlay, over-clad or remove
An asbestos cement roof that has to be dealt with offers two broad routes. One leaves the old sheets where they are and covers them with new cladding. The other lifts them off whole and puts a new roof in their place. Our guide to over-cladding asbestos roofs explains the first route and what it asks of the structure beneath.
Removal raises a waste question. HSE's EM9 guidance says: "Use a lockable skip for asbestos", and adds that "it is not good enough to throw sheeting over a standard skip". The household consignment-note exemption that GOV.UK describes applies to domestic hazardous waste "other than asbestos waste", so it gives a business no shortcut. Waste carriers register in the upper tier or the lower tier.
Which route suits a given roof depends on the sheets, the frame underneath and what the building is used for. The survey and the sample come first and the figure follows afterwards, as one written total. For scale only, MyJobQuote's average asbestos survey is around £325 in 2026 (page last updated 9 September 2026), a general figure that says nothing about any commercial roof.
Working safely around it
With fragile sheets, reaching the roof is the first hazard, ahead of any asbestos question. Our fragile roof safety guide covers how a roof of this kind is reached without anyone standing on the sheets.
A survey of an older commercial roof reads four things together: the sheets, the eaves and soffit, the roof lights set into the sheeting and the gutters. Each one affects how the work is planned. Where an old cement-sheet roof is leaking at a lap or a fixing, the repair has to be fitted around the same rules as a full replacement, which is why the material is established first. Sealing a split sheet from outside, or replacing a single sheet, still involves handling the cement, so even a small job starts with the same question. A roof light that has failed can be a separate matter: its frame is fixed into the sheets around it, and disturbing it disturbs them.
The commercial roofing hub at Total Roofing Great Yarmouth sets out the other guides in the group, including cladding, surveys and roof lights.


