Call 01493 277103

Chimney repairs

Do You Need a Chimney Cowl?

A cowl is a cover fitted to the top of a chimney pot. Whether you need one, and which kind, depends on what the flue carries and what you want the cover to keep out.

Get a written quote

Call 01493 277103WhatsApp us

A stack of new clay plain tiles on a scaffold board

The short answer

Not every chimney needs a cowl. A flue in use needs a cover that does not choke the draw, a flue that is closed off needs one that lets air through, and a flue troubled by birds or downdraught needs a guard or a turning cowl. What the flue is used for decides the choice.

What a cowl is for

A chimney cowl is any cover that fits over or into the top of the pot. It does one or more of three jobs: it keeps rain out of the flue, it keeps birds and nesting material out, and it changes how wind behaves at the top of the chimney. Different cowls do different mixes of those jobs, and a cover that suits one flue can be wrong for another.

A bare pot is open to the sky. Rain falling into an open flue wets the inside of the stack and the chimney breast below it, and on a flue that is not in use that wet has nowhere to go. A cowl reduces that, but a cowl that is too tight on a working flue can hold back smoke or fumes, so the cover is chosen with the flue in mind.

Cowls are made from clay, galvanised or stainless steel and sometimes aluminium, and they are sized to the pot. A loose or badly sized one can be blown off in a gale, so the fit counts as much as the type.

The three kinds, and what each one does

Chimney cowl types and their jobs
TypeWhat it doesWatch for
Rain capRoof-like hood over the pot that keeps rain outMust leave the gap round the sides open
Bird guardMesh or cage that stops birds entering the flueMesh can clog with soot on a working flue
Anti-downdraught cowlFixed or turning top that stops wind pushing downMoving parts need to stay free

Some cowls combine two jobs, such as a hood with a mesh round it. Our page on chimney bird guards goes into the mesh type, which is aimed at gulls and jackdaws near the coast.

A turning cowl follows the wind and keeps the opening on the sheltered side, which can help a flue that smokes back into the room in certain winds. A fixed anti-downdraught top does the same job without moving parts, so there is less to wear out. Neither one fixes a flue that is blocked, so a sweep or an appliance engineer should be asked before a smoking chimney is blamed on the wind.

Let the use of the flue decide

If the flue serves an open fire, a stove or a boiler, the cover has to let gases leave freely, and the installer of the appliance is the right person to say which terminal is suitable. A mesh over a solid fuel flue can clog with soot, so it needs checking and cleaning. On a thatched house the 2017 fire and rescue services' guide covers spark arrestors too: any that has been fitted has to be kept clean.

If the flue is disused, the aim is different. The chimney needs to stay dry but also to keep some air moving, so a cap that lets air through is better than a sealed lid. The separate answer on airing a capped flue explains why, and the survey can see whether the cover on your pot suits how the flue is used.

If you are not sure what a particular flue is connected to, say so when you ring, because that changes which cover can safely go on. A flue that looks dead from the roof may still serve a boiler or a back boiler in the house.

Having one fitted

A cowl is fixed at the head of the chimney, so the work is done from a platform that has to be safe first. Should the frame stand on the public highway, the county council's licence comes first, and we arrange the licence with our scaffolder. Fitting one is sensible while other work is already going on, since a platform will be up anyway and the extra visit is avoided.

Before quoting, the roof is surveyed and the pot is examined along with its bed and the joints under it, since a new cowl is no use on a pot that is cracked or loose. Tell us what the flue serves, whether that is an open fire, a stove, a boiler or nothing at all, because the answer changes which cover is suitable. The quote comes in writing as a single sum. If the bed under the pot is the trouble, chimney flaunching explains the repair. The chimney repairs hub sets out the other work a stack can need, and chimney repair costs gives dated third-party figures.

Questions and answers

Will a cowl stop my chimney smoking?

Only if wind blowing down the flue is the cause, and then an anti-downdraught cowl may help. Smoke coming into a room can also come from a blocked or dirty flue, a lack of air in the room or a fault with the appliance, and a cowl does nothing for those. The cause has to be found before a cover is chosen.

Can a cowl cause damp or block the flue?

A cover that is too fine or too tight can clog with soot on a working flue, and it can restrict the air movement a disused flue needs. That is why the cover is chosen to suit the way the flue is used and checked once it is on, and why a flue in regular use should have its cover looked at whenever it is swept.

Does a chimney with a cap still need a vent?

A flue shut off at the top and the bottom can trap moisture and show damp on the chimney breast. A vented cap, with a grille low in the fireplace, lets air through. The related answer on capped flues sets out the reasoning in full, including where the vents go.

Get a written quote

Tell us about your roof

Hand dressing a lead ridge roll with a wooden bossing stick

10-year workmanship guarantee, in writing

Call WhatsApp Written quote