Call 01493 277103

Chimney repairs

Can an Aerial Bracket Damage a Chimney?

An aerial on a chimney adds weight and a lever arm to a column of old brick. This page covers how a bracket can loosen a stack, what to look for and what happens when it comes off.

Get a written quote

Call 01493 277103WhatsApp us

A roofer on scaffold photographing a chimney stack and flashings with a phone

The short answer

Yes, it can. A bracket and aerial add weight at the top of the stack, and the wind pushes on the aerial like a lever. On pointing that has already worn, that pull and the lashing straps can crack joints, loosen bricks and open a path for rain.

What a bracket asks of a chimney

A television aerial is fixed to a chimney with a bracket that is lashed round the stack with straps, or bolted to it, with the mast and the aerial rising above. That looks light, but it is a load carried on the crown of the roofline, with nothing around it to break the wind. Wind pushing on the aerial turns into a sideways pull on the bracket, and the bracket passes it on to the brickwork at its fixings.

A sound stack takes that without trouble. A stack that has lost mortar from its joints, or whose top courses have loosened, has less to hold the pull, and the repeated movement of an aerial in the wind works at those weak joints. Over a long period it can open them further, until the bricks near the bracket move.

The pot and the flaunching sit at the same height. Movement in the top courses can crack the mortar bed under the pot, which lets rain in from above, so a loose aerial and a leaking stack can belong to the same fault.

Signs on the stack you can see

You can check a stack from the ground with binoculars, and you should not climb to look closer. Signs that a bracket may be working against the brickwork:

  • Cracks in the joints that run out from the bracket or the strap lines.
  • Rust staining on the brick below a strap, from a steel band that is corroding.
  • A strap that has slackened or bitten into the brick edge.
  • A mast or aerial that leans or moves in a breeze when the stack itself looks still.
  • Fresh damp on the chimney breast or the ceiling beside the stack after rain.

Photograph what you see, with the date. If a gale has bent the mast, shifted the bracket or brought down bricks, take photographs where things lie. The Financial Ombudsman Service says: "we'll usually look at expert reports and photos". Keep people away from beneath the stack until it has been looked at.

Removing an aerial and what it leaves behind

A bracket does not simply lift off. Where it was bolted or the straps gripped, there are holes, worn mortar and sometimes a cracked brick, and these are left open to rain once the bracket has gone. Taking an aerial down without repairing the stack behind it moves the problem along without ending it.

Aerial work is the job of an aerial installer, and the repair to the brickwork is a roofing job. The sensible order is to look at the stack first. Where the joints around the bracket have worn, the pointing is renewed, as described in chimney repointing, and a cracked bed under the pot is renewed as in chimney flaunching. Where bricks have moved, the top of the stack may need rebuilding, which chimney stack rebuild explains.

The aerial can then be refixed, or moved to a place that does not load the stack, such as the gable wall, by the installer. That choice is yours, and a survey can say whether the stack is in a state to carry a bracket at all.

The survey, the quote and access

An aerial is fixed high on the stack, so the survey follows the column from the pot and flaunching down to the flashings at the base and the tiles around it. What the survey finds is explained to you without jargon, and so is anything else it noticed elsewhere on the roof. The repair is then priced as one written total. How much the repair costs depends on the height of the stack, how many joints have opened and whether bricks have shifted, and that figure comes with the survey.

Reaching the top of a stack safely can call for a scaffold. Where the poles stand on the highway, the county council has to grant a licence, and we arrange the licence with our scaffolder. If the aerial has to come down for the repair, the installer takes it off and refits it afterwards, so the order of the two jobs is agreed before anyone books a date.

A photo of the stack and the bracket sent to WhatsApp 07880 284133 gives a first look, and our main page on chimney repairs covers the other stack faults.

Questions and answers

Is it safe to leave an old aerial on a weathered chimney?

It depends on the state of the stack, which cannot be judged from below. If the pointing is sound and the bracket is tight, it can stay. If joints near it have cracked or the mast moves in wind, the stack should be looked at. Keep clear of the ground beneath until it has been checked.

Do lashing straps cause damage on their own?

They can. Steel straps rust, and as rust swells it can stain the brick and push on the joints beneath. A strap that has slackened lets the bracket rock against the stack, and each rock works at the brick edge a little more. A survey looks at the strap lines for cracked joints and staining, then reports what it finds on the brickwork around them.

Who removes the aerial, a roofer or an installer?

The aerial and its mast belong to an installer, who also handles the signal when it is refitted. The roofer repairs the brickwork, pointing and flaunching around the bracket. Doing the stack repair first means the bracket is not refixed onto weak joints, and the aerial can go back to a sound stack.

Get a written quote

Tell us about your roof

Hand dressing a lead ridge roll with a wooden bossing stick

10-year workmanship guarantee, in writing

Call WhatsApp Written quote