The short answer
A slate roof can carry clay ridge tiles or slate ridge pieces, bedded in mortar or fixed dry. Marley wants every ridge and hip tile mechanically fixed against calculated wind uplift, and BS 8612:2018 is the specification for dry-fixed systems.
What the ridge covering is for
Slates stop at the top of each slope, and the gap between the two top courses is covered by ridge pieces. They shed rain from the join, keep wind out of the roof space and finish the roof line. If a ridge piece comes away, rain and wind reach the top of both slopes at once, so the ridge matters out of proportion to its size.
Because it stands at the highest point, it meets the strongest wind of any part of the roof, and the fixing has to hold it down. Marley puts it this way: "In all cases, ridge or hip tiles should be mechanically fixed to resist the calculated wind uplift force." That sentence applies whether the ridge is clay, concrete or something else, and whichever way it is bedded.
A damaged ridge is also a way for rain to reach the loft, so a loose piece is dealt with promptly once it is seen. Our guide to slate roof repairs explained shows how top-of-roof faults are found and mended.
Clay and slate ridges
Two families of ridge piece sit on a slate roof. Clay ridge tiles are half-round, angled or crested, in a fired clay that can be left natural or glazed, and they are bedded along the top of the slopes. Slate ridges are formed from slate itself, with the pieces lapped and fixed as a cap in a way that echoes the courses below, and they give the roof a continuous slate finish.
Neither is wrong for a slate roof. Clay gives a heavier, more traditional line and slate keeps the whole roof one material. The choice is partly one of look, partly one of the detail already on the house, and partly one of what the rafters at the top of the roof can carry. Any change that makes the covering 15 per cent or more heavier brings Building Regulations approval into play, so a change in ridge material is raised at the survey alongside everything else.
Whatever the material, the ridge sits over the same timber, and a rotted ridge board is found only when the old ridge is lifted off.
Two ridge families on slate
- Clay: half-round, angle or crested pieces
- Slate: pieces formed from the roof's own material
- Both can be bedded in mortar or fixed dry
- Both must be mechanically fixed against uplift
Mortar against dry-fixed
A mortar-bedded ridge is set on a bed of mortar run along the top of the slates, with the pieces pointed at their joints. It is a long-established method and its weak point is the mortar: it cracks and falls out as the roof moves and weathers, and the piece it held can slip. Marley says the 2015 amendments made it clear that mortar "could no longer be relied upon as the only means of securing the roof covering".
A dry-fixed system uses mechanical clips, brackets and screws to hold the ridge in place, with a ridge roll or batten beneath and no mortar bedding, and BSI lists BS 8612:2018 as the current specification covering ridge, hip and verge parts fixed this way. The advantage is the fixing: each piece is held by metal and not by a bed that can crack.
That does not make mortar wrong. A mortar ridge with additional mechanical fixings is the sound form of it. Ask which fixing is proposed and what holds each piece down, and ask for it in writing with the quote.
What ridge work costs, as published
Which? Trusted Traders, in a survey of 11 traders gathered in November 2025, gave £80 to £300, excluding VAT, for putting in one new ridge tile. MyJobQuote's page of 1 October 2026 gives "between £225 and £550" for the average ridge tile replacement. Checkatrade's June 2026 repair table, excluding VAT, lists ridge tile repairs at £50 to £70 per metre, a rate and not a total.
A hip is priced once it has been surveyed, because a ridge range does not stand in for it. The three ranges above rest on different bases and are not a quote: ridge length, access and the fixings settle the real number.
At Total Roofing Great Yarmouth the survey takes in the ridge, the hips and the slopes, and what follows is a single written total. Our slate roofing hub covers the other slate work, and slate roof cost has the dated prices for the roof itself.


