Call 01493 277103

Slate roofing

What a Slate Roof Costs

MyJobQuote's slate roof page, updated 6 October 2026, gives an average of around £7,800. This guide sets that beside other published figures, explains what drives the price on a real house, and shows how to read a written quote.

Get a written quote

Call 01493 277103WhatsApp us

A lead-lined parapet gutter at the foot of a slate roof

The published figures for a slate roof

The first figure comes from MyJobQuote's slate roof page, last updated on 6 October 2026: "The average cost of fitting a slate roof is around £7,800." No VAT basis is stated on the page, so nobody should add VAT to that number or take it off. An average like this says nothing about the size of your roof, and it covers every job the site has seen.

Other sources give figures for particular houses. In a guide last updated on 30 September 2025, HomeBuilding sets out a standard three-bedroom semi with a 65m2 roof: with plain concrete tiles it may cost between £10,000 and £15,000, while Welsh slate on the same property might reach £18,000. From a survey of 11 traders in November 2025, Which? Trusted Traders give a range of £7,000 to £21,000, excluding VAT, for a full re-roof of an average three-bedroom house. That Which? range spans roofs of every covering, so slate is only one part of it.

The numbers share a part of the market without agreeing, and each one describes a different house, date and covering. Use them to judge whether a quote is in a sensible region, and do not read any of them as a price for your own roof. The table gathers them with their sources.

What we charge for your roof is settled after the survey, and it reaches you as one written total price.

Published slate and whole-roof figures

Fitting a slate roof, average (MyJobQuote)around £7,800, an average
Welsh slate, 3-bed semi, 65m2 roof (HomeBuilding)might reach £18,000
Plain concrete tiles, same house (HomeBuilding)£10,000 to £15,000
Whole roof, any covering (Which?)£7,000 to £21,000 excluding VAT, for an average three-bedroom house

MyJobQuote page updated 6 October 2026, no VAT basis stated; HomeBuilding last updated 30 September 2025; Which? Trusted Traders survey of 11 traders, November 2025. All three are third-party figures.

What sets the price on a particular house

Under the slates, a roof is built up from several things that are each priced by the job: the slates, the battens that carry them, the underlay beneath, the fixings, the ridge and hip details, the lead at each chimney and wall, and the labour to lay it all. The covering is only one of them, and a published average blends them all across houses of every size.

Roof area comes first. A larger roof takes more slates and more hours, and area is measured on the slope, not from the plan of the house. Pitch comes next: a steep roof is harder to work on and needs more access. Complexity adds to it. Valleys, dormers, a chimney, a roof window or several changes of level each mean extra details to build, and a plain gable has none of them.

The condition of what lies underneath counts too. If the battens are rotten or the underlay is perished, they are replaced with the slates. If the rafters or the wall plate have been wet for years, they need attention before a new covering goes on. Nobody can price that from the pavement, so the number waits for the survey.

Access finishes the list, and it is hard to judge from a photo. A terrace on a narrow street, a roof over a conservatory or a house set far back from the road each changes how materials are lifted and how the work is reached.

What sets the price

  • Roof area on the slope
  • Pitch and height of the building
  • Valleys, dormers, chimneys and windows
  • Condition of battens, underlay and timbers
  • Access, scaffold and the choice of slate

Welsh, Spanish and reclaimed slate

Three kinds of slate make up the choice, and each is graded differently. Welsh slate is quarried in Wales, Spanish slate is quarried in Spain and reclaimed slate is taken from an old roof and sold again. HomeBuilding's guide gives approximate lifespans for each: Welsh slate 100+ years, Spanish natural slate 75 to 100 years and reclaimed Welsh slate 50 to 80 years.

Those are lifespans and not prices, so the table keeps to what HomeBuilding publishes. The £18,000 for Welsh slate on a 65m2 roof is the one slate-specific total among the figures above, and it belongs to that house alone, so a price per slate or per square metre for each kind is fixed at the survey.

Approximate slate lifespans, HomeBuilding (last updated 30 September 2025)
SlateLifespan, approximate
Welsh slate100+ years
Spanish natural slate75 to 100 years
Reclaimed Welsh slate50 to 80 years

A longer life does not make one choice right for every house. The slates on the roof now, the budget, whether the building is listed or in a conservation area and the look the house needs all come into it. Our guides on Welsh versus Spanish slate and reclaimed roof slates take the choice further, and the survey says which of them the roof can take.

Repairing a slate roof instead of re-roofing it

Not every slate roof needs replacing, and the cost of a repair is a different number from the cost of a new roof. Checkatrade's repair guide has a price table updated in June 2026, with every cost exclusive of VAT. In it, repairs to a pitched clay tile roof run at £110 to £160 per m2, whereas repairs to a natural slate roof could cost around £190 per m2. Those are rates for each square metre of repaired roof, and they are not a total for a house, since the area needing repair is only known once someone has been up and looked.

Checkatrade also gives £50 to £70 per metre for lead flashing repairs, again exclusive of VAT, from the same table. Lead is the metal that seals a slate roof at the points where it ends against a chimney, wall or window, and a failed strip of it lets water in however sound the slates are. Lead flashing repair is a job in its own right, so it can be added to a slate repair or stand alone.

A repair is the right answer when the slates are sound and a few have slipped, cracked or lost a fixing. It is the wrong answer once the nails are failing across the roof, because each repair then leaves the next failure waiting, and the money goes into the same roof twice. Our guide to re-slating a roof explains what a full strip and relay involves and how to tell which a roof needs.

Surveying means looking over the whole roof, not only the slates that prompted your call. What it finds is reported in plain words, and that can be a slate or two or a roof whose fixings have given up.

Scaffold, lead and the details that add to a bill

Scaffold belongs inside the written quote for any roof that needs it, and a slate roof on a house of more than one storey does. Scaffolding on the pavement or road needs a highway licence from the county council, and we arrange the licence with our scaffolder. Norfolk County Council and Suffolk County Council set their own licence rules and fees, so the council for your address matters.

Lead details are the other part of the bill. Each chimney, abutment, valley and roof window junction needs lead or another weathering. Lead is graded by code from 3 to 8 under BS EN 12588, and Leadworx, a maker of lead flashing, says code 4 has become the standard choice for general flashing work. MyJobQuote says correctly installed lead flashing can last for over 80 years. Re-using old lead on a new roof is a point to settle at the survey, since lead that has cracked or thinned gives out before the new slates do. A roof with several lead details is a different quote from one with a single chimney, and that difference shows in the total.

Fixings and battens are the details that matter for the next fifty years. Cupa says BS 5534 puts the lowest pitch at 20 degrees for natural slate that is 500mm long with a 115mm overlap, in moderate exposure. Hook fixings are ruled out below 25 degrees on Cupa's advice. Our page on slate roofing sets out the other points to check on a slate roof.

Ridge and hip details are priced after the survey as well. Published ridge prices are for tile ridges and hips are not priced anywhere, so neither can stand in for the details of a slate roof.

Rules that touch the price, and reading the quote

Under the Planning Portal, a building regulations application is not normally needed when less than 25 per cent of the building envelope and less than 50 per cent of the roof are affected. A whole new slate roof affects well over half the roof, so that test cannot cover it. The route is checked with building control, which is the council's own team or a registered building control approver, ahead of the work. Re-roofing a house is normally permitted development under Class C, but listed homes, conservation areas and Article 4 directions change the questions to ask.

Where the new covering is 15 per cent or more heavier than the old one, the Planning Portal says approval is needed, and it recommends consulting a structural engineer or surveyor first. We name no covering as heavier or lighter, because a roof's own build-up decides it.

When you compare quotes, read what each one covers: the covering and its origin, the battens and underlay, the lead details, the ridge, the scaffold and the guttering if it is disturbed. A quote that is far lower than the others may be leaving something out, and a quote that names none of those things gives you nothing to compare. A written total that names them is the one to rely on.

Our quote gives a single written total, priced fairly for the work set down in it, once the survey is done. A photo of the roof sent over WhatsApp is a way to get a first opinion on the slates.

Questions and answers

How much does a slate roof cost on an average house?

On the MyJobQuote page updated 6 October 2026, the average cost of a fitted slate roof is around £7,800, and HomeBuilding says Welsh slate on a three-bedroom semi with a 65m2 roof might reach £18,000. Those describe other houses, dates and coverings, and the price for yours arrives as one written total once the roof has been surveyed. A roof with failing battens or a rotten plate moves it up, and a plain gable with sound timbers can bring it down.

Is a slate roof more expensive than a tiled roof?

HomeBuilding's worked example is a three-bedroom semi with a 65m2 roof, and it says plain concrete tiles may cost between £10,000 and £15,000 and Welsh slate might reach £18,000 (last updated 30 September 2025). Both are third-party figures for one house, so the difference on your own roof comes out of a survey and the written quote that follows it, and a roof with failing battens will move the answer either way.

Can a slate roof be repaired instead of replaced?

Yes, if the slates are sound and the fault is a few slipped or cracked ones or a failed piece of lead, and Checkatrade's table is a useful check on a repair quote. Checkatrade puts natural slate repairs at around £190 per m2, excluding VAT, in its June 2026 table. If the fixings are failing across the roof, a re-slate is the better answer.

Does re-roofing in slate need Building Regulations approval?

A full re-roof is too large for the Planning Portal's no-application test, since it affects more than 50 per cent of the roof. Building control, whether the council's team or a registered approver, confirms the route, and a covering 15 per cent or more heavier needs approval, so the question is raised at the survey and not after the slates have arrived.

Get a written quote

Tell us about your roof

Hand dressing a lead ridge roll with a wooden bossing stick

10-year workmanship guarantee, in writing

Call WhatsApp Written quote