The short answer
A dry verge finishes the sloping edge of a tiled roof at a gable end with fixed units instead of a bed of mortar. The units hold the end tiles down mechanically, and BS 8612:2018 is the current standard for these systems. Marley adds that mortar by itself has stopped being an accepted way to secure the covering.
Where the verge sits on a roof
A gable is the triangle of wall at the end of a pitched roof, and the verge is the roofline edge where the slope ends against it, climbing from the gutter line to the apex. Tiles at that edge have open air on one side, so a gust reaches them sideways as well as from underneath.
On a traditional verge the end tiles overhang the wall slightly and are bedded in a ribbon of mortar, which is then pointed and sometimes painted. A dry verge replaces that ribbon. A purpose-made unit runs along the edge, the end tiles tuck beneath or against it, and screws or clips fix the unit and the tile ends to the battens or the rafter below.
The result looks tidier from the road, because there is no pointing to see, and it asks nothing from mortar once the roof is complete. There is no bedding to dry out, crack or drop in pieces onto a path.
Why mortar stopped being the only fixing
Mortar bonds well for a few years and then ages. It shrinks, it cracks along the joint with the wall, and frost and driven rain get into the cracks. Once the bed has failed, the end tile is held by little more than its own weight and whatever nail sits behind it.
The codes have moved on from relying on it. Marley's guidance on BS 5534 says the 2015 amendments made it clear that mortar "could no longer be relied upon as the only means of securing the roof covering". It also notes that installing to BS 5534 "isn't required by law", so it counts as a code of practice, not a statute.
Dry verge systems are one answer to that change, because every end tile gets a mechanical fixing that does not depend on the bed. Mortar can still be used on a verge, but it is no longer the whole job. A roof's fixing specification is drawn up for the individual site and takes its exposure into account, so a verge on an open site is judged against the conditions there.
The standard and the parts of a system
BS 8612:2018 is listed as current by the British Standards Institution. The standard is the specification that ridge, hip and verge components are made to, and BS 5534:2014+A2:2018, the tiling code, is listed as current beside it.
A verge system is made from a handful of parts, and a survey looks at each of them where the verge is open:
- The verge unit itself, which caps or closes the end of the tile course.
- The fixings that hold the unit and the end tiles.
- The batten ends and the rafter or barge board they rest on.
- The underlay dressed at the edge so that water is carried onto the tiles.
- The mortar or sealant at the wall, where a system leaves a joint to fill.
Our guide to dry verge systems goes through the types and what separates them, and the pitched roofing page on what a pantile roof is explains one of the tiles that can sit against a verge.
What a dry verge costs and what the survey checks
MyJobQuote's page on dry verge installation, last updated 8 October 2026, says the cost usually falls between £500 and £2,000. It gives no VAT basis and it describes work to a verge rather than a whole roof, so the figure says little about a full re-roof.
On a real roof the price turns on the length of verge, the height of the gable, whether the old mortar bed has to come off first and how the roof is reached. The slope of a gable above a pavement or road may mean scaffold, and where it does, that sits within our one written total price.
At Total Roofing Great Yarmouth a verge gets surveyed together with the ridge, the battens and the tiles around it, so a loose end tile is reported alongside whatever else we saw. Nothing about the verge is priced from a photo alone, though you can send one on WhatsApp first. For what a pitched roof repair costs overall, see pitched roof repair cost, and for the wider service the pitched roofing page.


