Call 01493 277103

Pitched roofing

How Are Ridge Tiles Fixed?

Ridge tiles are fixed in one of two ways: bedded in mortar with a mechanical fixing, or clipped down as a dry-fixed system. This page covers how each works and what the standards say.

Get a written quote

Call 01493 277103WhatsApp us

Close-up of new lead step flashing dressed against a red brick chimney on a clay-tiled roof

The short answer

Ridge tiles are either bedded in mortar and also fixed mechanically, or held down by a dry-fix system made to BS 8612. After the 2015 amendments to BS 5534, Marley says, mortar could no longer be relied upon as the only means of securing the roof covering.

The mortar-bedded ridge

The older method sets each ridge tile in mortar spread along the apex, with the joints between tiles pointed up. Mortar closes the gap under each curved tile, above the roof tiles beneath, and bonds the run together. Done well, it makes a solid line that sheds water off the join between the two slopes.

Mortar has a weakness: it is weather-exposed at the very highest point of the house. Frost, rain and thermal movement work on it, and it can crack, loosen and fall out in pieces. When that happens the tile above it loses its seat, and the first you may know of it is a gap on the skyline or a handful of grit in the gutter.

From Marley, a tile maker: the 2015 amendments to BS 5534 made it clear that mortar "could no longer be relied upon as the only means of securing the roof covering". It also states that "in all cases, ridge or hip tiles should be mechanically fixed to resist the calculated wind uplift force". So a modern mortar ridge has the mortar for bedding and weather-sealing, plus a fixing that does the holding.

The dry-fixed ridge

A dry ridge replaces the mortar bed with a mechanical system. Ridge tiles are screwed or clipped to a batten or a fixing on the roof, and the gap along the apex is closed with a vent strip or a roll, so no wet mortar is needed. BS 8612:2018 is the specification for these systems, and the British Standards Institution lists it as current.

The practical difference is on the day of the work and in the years afterwards. A dry-fixed ridge does not depend on mortar staying in place, so there is nothing to crumble. It does depend on the parts being the right ones for the system and on the fixings being set for the roof in question, which is why dry-fix components are matched to each other rather than mixed.

A roof near the coast adds its own considerations to picking mortar or dry fix, and we cover them in a post on dry ridge or mortar on a coastal roof.

Two ways to hold a ridge

Mortar bed

  • Tiles set in mortar
  • Joints pointed up
  • Needs a mechanical fixing too
  • Mortar can crack and fall

Dry fix

  • Tiles screwed or clipped
  • System parts match
  • Covered by BS 8612
  • No mortar to crumble

What the standards say

BS 5534:2014+A2:2018 covers slating and tiling on pitched roofs, and the BSI lists it as current. Marley notes that installing to BS 5534 "isn't required by law". The standard is guidance for builders rather than a statute, though tile makers such as Marley still write their ridge fixing advice around it.

Marley adds that a specification drawn up for the particular site overrides the minimum figures in BS 5534, and that it weighs factors such as how exposed the roof is. On a given house, then, the number of fixings and their type is worked out for that roof, not read off a table. On a coastal roof the specification is calculated for the site's exposure.

Because mortar is no longer relied on as the only fixing, the question to ask of any ridge is what is actually holding it down. On a roof inspected from a ladder or in a photo, the answer is not always visible, which is why the ridge is one of the things the survey looks at closely.

Why ridge work is not a DIY job

The ridge is the top of the roof, and reaching it means working on a pitch with the drop on one side. A slipped boot or a loose tile underfoot has no soft landing. That is reason enough to leave it to people who work at height as a trade, with the access in place before anyone steps onto the slope.

There is a second reason. A tile pushed into a patch of fresh mortar can look fixed and still not resist wind uplift, because the fixing is what does that job and it is not visible from the ground. A repair that looks tidy and does not meet the fixing requirement has simply moved the failure to the next windy night.

The cost side is better understood than people expect. For a new ridge tile, Which? Trusted Traders give £80 to £300, excluding VAT (November 2025). MyJobQuote gives an average of £225 to £550 for ridge tile replacement (1 October 2026). Checkatrade's repair table gives £50 to £70 per metre for ridge tile repairs, excluding VAT (June 2026). That last one is a rate, not a total. More figures sit in our pitched roof repair cost guide, and the rest of our work on tiled roofs is under pitched roofing.

Questions and answers

Which suits my roof, dry fix or mortar?

They solve the same problem in different ways. A dry-fixed system, made to BS 8612, does not rely on mortar, so there is no bed to crack. A mortar ridge fixed mechanically as well can also meet the requirement. The right choice depends on the tile, the roof and the exposure, and the survey looks at all three before anything is recommended.

Does every ridge tile need a mechanical fixing?

According to Marley, ridge or hip tiles should be mechanically fixed to resist the calculated wind uplift force, in all cases. It also says that BS 5534 itself is not required by law. So the fixing is the sound way to build the ridge, and the number and type of fixings come from a site-specific specification.

Can the old mortar just be repointed?

Repointing the joints can fix cosmetic cracks, but it does not add a mechanical fixing, and if the bed beneath has failed the new pointing sits on loose material. Whether a ridge can be repointed, rebedded or replaced with a dry system is a judgement made after looking at it up close, on the roof, rather than from the garden.

Get a written quote

Tell us about your roof

Hand dressing a lead ridge roll with a wooden bossing stick

10-year workmanship guarantee, in writing

Call WhatsApp Written quote