The short answer
Yes. One ridge tile can be taken out and replaced without redoing the whole ridge, provided a tile of the same profile and colour can be found and the tiles either side are sound. For a new ridge tile, Which? Trusted Traders give a range of £80 to £300, excluding VAT (November 2025).
Taking one tile out of a ridge
Ridge tiles are the capping pieces that run along the apex, the line where the two slopes meet. Each is set in mortar, or clipped and screwed down as part of a dry-fix system, and each butts against the next. So a single ridge tile is not freestanding. Lifting it out disturbs the joints on both sides, and the neighbours have to be firm enough to take that.
A cracked tile with solid joints either side is a small job: the broken piece comes off, the bed is cleaned back, and a new tile goes on. A ridge where the mortar has crumbled along its length is a different matter. The loose tile you noticed from the garden may be one of a run that has lost its grip, and replacing it alone would leave its neighbours to work loose next.
So we survey the whole ridge, and the roof beneath it, before pricing anything. If the survey shows the neighbours are going too, you hear it from us in plain words and decide how far to go.
Matching the profile and the colour
Ridge tiles come in more than one shape. Half-round, angled and other profiles exist, in both clay and concrete, and a tile from the wrong family will not sit along the line of the old ones or bed down onto the ones next to it. Colour is the second check. A new clay or concrete tile will be brighter than tiles that have weathered for decades, so a swap can show as a lighter patch until the weather catches up.
A matching tile can come from a few places: a supplier who still makes the profile, a reclaimed tile of the same type, or a tile lifted from a part of the roof that cannot be seen from the road. Where nothing close enough turns up, the choice is between a visible mismatch and replacing a longer length of ridge in one go so the new tiles read as a set. That choice is the owner's, and we set the options out before work is booked.
Our guide to what a pantile roof is explains how the roof tiles beneath the ridge are shaped, which matters when the ridge has to sit tight against them.
What we check before swapping one tile
- Whether the broken tile is a single failure or one of several
- Whether the mortar either side is sound or crumbling
- The profile and size of the existing ridge tiles
- Whether a matching tile can be found
- How the ridge is fixed to the roof beneath
- How we reach the ridge safely
What holds the new tile on
Marley says that "in all cases, ridge or hip tiles should be mechanically fixed to resist the calculated wind uplift force". It also says the 2015 amendments to BS 5534 made it clear that mortar "could no longer be relied upon as the only means of securing the roof covering", and that installing to BS 5534 "isn't required by law". So a replacement tile is not simply pressed into a fresh dab of mortar.
Where the ridge is bedded in mortar, the new tile is fixed in a way that does not depend on the mortar alone. Where the ridge is a dry-fixed system, built to BS 8612, the replacement has to be a part that suits that system, which narrows the choice of tile further. Either way, BS 5534 expects the fixing specification to be worked out for the site, allowing for how exposed the roof is.
There is a wider reason to look beyond the one tile. If the ridge relies on mortar that has failed in several places, the fixing that matters is the one that holds the whole run, and our post on a missing ridge tile covers how serious that is.
Reaching the ridge and what it costs
Getting up to the apex safely is part of the price. On a bungalow, ladders can reach the apex. A taller house may need scaffolding, and scaffolding on the pavement needs a Highways Act licence from the county council; we arrange the licence with our scaffolder. Access is one reason the same job can sit at either end of a published range.
| Job | Figure | Source and date |
|---|---|---|
| A new ridge tile | £80 to £300 | Which?, November 2025, ex VAT. |
| Ridge tile replacement, average | £225 to £550 | MyJobQuote, 1 October 2026. |
| Ridge tile repairs | £50 to £70 per metre | Checkatrade, June 2026, ex VAT. |
The Checkatrade figure is a rate per metre, not a total, so it says little until the length of ridge is known. Your own figure comes after the survey. For the wider picture, see the pitched roof repair cost guide, and our pitched roofing page for the rest of the work we do on tiled roofs.


