What the exemption protects, and what ends it
A conservatory is an extension to a house that the Building Regulations treat lightly. Schedule 2 to the Building Regulations 2010, Class 7, exempts "a conservatory, porch, covered yard or covered way" where the floor area of the extension does not exceed 30 m². Within that exemption, much of the regulations' energy and structural machinery does not apply to the room, which is why a conservatory can be built without the paperwork a house extension needs.
The exemption is conditional. It describes a room that is separate from the house in its thermal and structural character: closed off by a wall, door or window, not heated from the home's heating, glazed to a safe standard and of limited size. Take away one of those and the room is no longer what the exemption describes, and it is judged as part of the house.
That is what happens when a conservatory is converted into a proper living room. Removing the wall between the house and the room, running radiators into it from the central heating, rebuilding its roof as a solid roof or building solid walls to replace the glazing each changes the room's character. A conversion can involve several of these at once, so the exemption can be lost on more than one count.
Nothing here is a reason to avoid converting. It marks the point at which a conservatory becomes a room that has to meet the Building Regulations in the way a new extension does, so the work is planned for that from the start. The conservatory roofs hub covers the roof options that fit either side of that line.
Conditions for the energy exemption
Approved Document L, the part of the regulations that covers fuel and power, sets out the conditions for the energy exemption in paragraph 0.14 of its 2021 edition. All of them have to apply. They are listed here in the document's own words so that nothing is lost in summary.
| Condition | The wording | What breaks it |
|---|---|---|
| a | "The extension is at ground level." | A first-floor room over the ground-floor one |
| b | "The floor area of the extension does not exceed 30m2." | Enlarging the footprint past 30 m² |
| c | "The glazing complies with Part K of Schedule 1 to the Building Regulations." | Glazing that does not meet Part K |
| d | "Any wall, door or window that separates the extension from the dwelling has been retained or, if removed, has been replaced with a wall, door or window." | Opening the room into the house with nothing between |
| e | "The heating system of the dwelling is not extended into the conservatory or porch." | Radiators fed from the house's heating |
Condition d rewards a slow read. A wall, door or window can be removed, provided something takes its place: a new door, a window or a wall. A fully open knock-through with no separation is what breaks it. Condition e is about the heating system. The exact words are: The heating system of the dwelling is not extended into the conservatory or porch. Putting radiators into the room from the house's central heating breaks it. The Welsh form of the rule is worded differently, and so is a local council FAQ, so the document's own text is the one to rely on in England.
What can end the exemption
- Removing the separating wall, door or window with nothing in its place
- Extending the home's heating into the room
- Building a floor area over 30 m²
- Fitting glazing that does not meet Part K
- Adding a storey above the ground-level room
Opening the room to the house
Taking out the wall or the doors between a house and its conservatory is the step you can see most clearly in a conversion. A conservatory has no insulation in its walls or roof to speak of, so an open link lets cold air move into the house and warm air out of it. That is a comfort problem and an energy problem, and the exemption exists on the basis that a separating wall, door or window keeps the two thermally apart.
The wall between the house and the conservatory is also an external wall of the house, with a lintel over any opening in it. A new wide opening needs a lintel or beam that carries the wall above it, and a beam needs bearing points on sound masonry. That is structural work, and it is one of the reasons building control gets involved. A beam's size comes from a calculation, not a rule of thumb.
The house's rooms next to the conservatory matter too. A bedroom or a hall whose escape route used to go through a window that now opens into a conservatory is a safety question, and Approved Document B covers means of escape. Where a first-floor room above opens onto the conservatory roof, the roof is also in the escape picture, so check what each room relies on before a wall comes out.
On a conversion, the old outer walls of the conservatory become the new room's walls. Those walls were built to carry glazing, and insulating them to the standard a living room needs means more depth, which changes the room's size and the foundations' loading. The guide to whether a conservatory can take a solid roof covers the frame and the base in detail.
The roof in a conversion
A conservatory's roof is the part that changes most in a conversion, because it is where a glazed room loses and gains heat fastest. The Planning Portal says: "A new roof must comply with building regulations to ensure it is structurally safe, energy efficient and properly ventilated." A new solid roof is one way to bring the room up to the standard of the house, and the Building Regulations deal with how it is built.
Approved Document L 2021 gives a U-value of 0.15 W/(m²·K) for a roof in Table 4.2, a figure for how much heat passes through each square metre. It gives 1.4 W/(m²·K) or Window Energy Rating Band B in the case of a roof window and 2.2 W/(m²·K) for a rooflight. Those figures are what a new insulated roof is judged against when the room is no longer exempt, and they show why a thin glazed roof cannot meet them.
A warm-roof build-up, with the insulation in a continuous layer over or between the rafters, is the form that fits a shallow roof, and a roof built that way needs no ventilation space of its own. The insulating a conservatory roof guide covers the build-ups and the condensation side in more depth.
The roof does not have to be tiled. A lightweight insulated roof and a tiled roof can both be built to meet the standard. The choice depends on the structure, the pitch and the look, and the survey settles which the frame and walls can take. Each has its own build-up of layers, and each has junctions at the house wall and the side walls that have to be detailed so that rain stays out and heat stays in.
Heating, glazing and the rest of the room
Extending the home's heating into the room is the point of many conversions: a room used all year, warmed by radiators or underfloor heating from the house system. It is also what takes the room out of the exemption by condition e. From that point the room is part of the heated house for the energy rules, and its walls, floor, roof and glazing are judged on that basis.
The glazing has to meet the standards for a heated room as well as Part K, the safe-glazing rules. Windows and doors in a heated extension are subject to the energy rules, and the large glazed areas of an old conservatory may not meet them. Replacing glazing is a common part of a conversion, and the amount of glass the new room keeps is a design decision, not a fixed rule.
The floor matters too. A conservatory floor can be a simple slab with no insulation under it, and a heated room needs a floor that is insulated. Raising a floor changes the floor level against the house's own, and the doorway between them. That is another reason the whole conversion is thought through together, rather than as a roof job followed by other jobs later.
Before any wall is opened, it also helps to know what runs through it: a gas or electricity cable, a drain, or a radiator pipe. The routes for services are moved or protected as part of the same design, so that the opening, the beam and the services are planned in one go instead of being found one at a time.
Building control and planning for a conversion
Once a conversion falls outside the exemption, building control checks the work, whether that is the council's own team or a registered approver. A completion certificate from the council, or a final certificate from an approver, is the record at the end. The first call goes to Great Yarmouth Borough Council's building control team in the borough, or to East Suffolk Council's across the county line, before the work is designed.
Planning is a separate question. A like-for-like conversion that keeps the footprint and the roof's outline is a different matter from one that adds height, widens the room or changes the front of the house. The planning guide for a conservatory roof covers the limits that apply to roofs and the addresses that need a closer check: a listed house, a flat, an Article 4 area, a conservation area or land inside the Broads executive area.
A conversion is a bigger job than a roof replacement, and the roof is one part of it. Our survey looks at the roof and the frame it sits on, and anything else we spot is described to you in plain terms. The quote that follows prices the roof work as one total. The wider conversion, with its walls, floor and heating, is a building project in its own right, and the roof is planned alongside it, not ahead of it.
A sensible order for a conversion
- Survey the frame, walls, base and roof
- Confirm the building control route for your address
- Check planning for any change to size or outline
- Agree the structure, roof and heating together
- Fix the written price once the design is settled


