Call 01493 277103

Conservatory roofs

Tiled Conservatory Roofs

A tiled conservatory roof turns a glass room into one with a solid, insulated roof and a plastered ceiling. This guide covers the build-up, the weight on the frame, tile lifespans and the checks first, within our conservatory roofs work.

Get a written quote

Call 01493 277103WhatsApp us

Bungalow roof half cleaned of moss and lichen

What goes into a solid roof on a conservatory

A tiled conservatory roof is a small version of the pitched roof on the house next to it. Inside the frame sit the rafters, and over them a layer that keeps wind-driven rain out, then battens that the tiles hang from, then the tiles. Below the rafters comes the insulation and a plasterboard ceiling that is skimmed and painted like any other room. The result reads as part of the home.

Each layer has a job. The tiles shed the rain. The battens set the spacing the tiles need, so they lie correctly and overlap by the right amount. The underlay is a second line of defence behind the tiles. The insulation slows heat loss. The ceiling gives the room its finished face and holds the insulation in place from below. Take one away and the others cannot make up for it.

Because the roof is a solid build, the conservatory loses the old glass roof's light from above. Designers add roof windows, a lantern or a glazed panel to bring some back, and those are part of the roof, not an extra. A homeowner choosing a tiled roof is choosing a room that works like a normal room, with a ceiling you can fit lights into and a roof that is not see-through.

A tiled roof can be fitted on a new conservatory frame or in place of an old glazed roof on an existing one. The second case brings the checks in the sections below, and it is the case this guide is written around.

Layers from outside to inside

  • Tiles fixed to battens
  • Underlay beneath the battens
  • Rafters carried by the frame
  • Insulation in or under the rafters
  • A plastered ceiling below

What a heavier roof asks of the structure

A glazed roof is light, and the frame that carries it was designed around that. Tiles, battens, insulation and a plasterboard ceiling add up to more load, and every part of the structure beneath has to take it: the frame, the dwarf walls, the foundations and the fixings to the house wall. Weight is the first question for any solid roof.

The Planning Portal's advice on a heavier covering is plain: "you are advised to check with a structural engineer or surveyor before commencing with works". Its list of triggers includes a new covering material that "increases the weight of the roof covering by 15 per cent or more". Approved Document A says a significant change in roof loading is when "the loading upon the roof is increased by more than 15%". A glazed roof replaced by a tiled one is a new roof, and the structural check is the first piece of the job.

No tile is assumed to suit a frame. Some conservatory frames are built to take a solid roof and some are not, and the way to find out is having the structure under the roof surveyed. The survey looks at the frame material, the state of the low walls under it, the foundations and the fixing to the house. The answer can go either way for conservatories that look alike, so it is read on the day.

Lightweight tiles exist to ease this problem. They are designed to ask less of the frame than conventional tiles do, and the systems built around them are covered in our guide to lightweight warm roofs. They do not remove the structural check; they change what the check finds.

Myth

If the old glass roof stayed up for years, the frame will carry a tiled one.

Fact

A solid roof loads the frame differently, so the structure is checked before the roof is chosen.

Insulation, the ceiling and keeping the room dry

Heat loss is the reason many homeowners move from glass to tiles, and the Planning Portal records the motive: "Many homeowners choose to replace their traditional polycarbonate conservatory roof with a solid tiled roof for better thermal efficiency." A solid roof carries insulation in its depth, which a thin glazed or polycarbonate roof cannot.

The insulation goes in one of two places. In a warm roof it sits above or between the rafters, with the ceiling below it. In a cold roof it lies along the ceiling line and air moves through the roof space above. For a cold roof beneath a high-resistance underlay, Marley gives "25mm along the length of the eaves for pitches of 15° or less; 10mm along the length of the eaves for pitches of more than 15°." That underlay lets no vapour pass, so the eaves gap does the work.

Moisture is the other half of the question. The room beneath is a living space, so it makes steam from cooking, drying and breathing, and a roof that traps that steam grows damp in the build-up. The ceiling, the insulation and any membrane in the roof are chosen so that steam is kept out of the cold part of the roof, or drained from it. The ventilation guide for solid conservatory roofs takes the point further.

A plastered ceiling is part of that system. It is a finished surface, and it is also the layer that keeps warm air in the room and out of the roof. Cutting recessed lights into it needs thought, because every hole is a gap in that layer. Where a fitting goes, the survey and the electrician agree the detail first, so the layer stays as airtight as it was designed to be.

Tiles: how long they last and how they are fixed

Published lifespans vary by source, and each source's own wording is part of its figure. Marley, the tile maker, says: "Typically, roof tiles are expected to last for around 60 years", and adds "This is not a guarantee or warranty of its longevity." For clay tiles, the BRE determined a minimum life expectancy of 60 years, a figure that belongs to clay only.

HomeBuilding's table gives approximate lifespans of 60-80 years for clay tiles and 40-50 years for plain concrete tiles, a concrete span 20 to 30 years below the clay one. For the conservatory roof itself, Roofing Megastore's managing director, quoted by HomeBuilding, says: "A tiled conservatory roof will typically last in excess of 50 years with little maintenance being required." That is one person's published view, not a promise on your roof.

Then comes how the tile is fixed. BS 5534 covers slating and tiling, and its current version is BS 5534:2014+A2:2018. Marley says installing to BS 5534 "isn't required by law", and that since the 2015 amendments mortar "could no longer be relied upon as the only means of securing the roof covering". Tile fixings are set by a site-specific fixing specification under BS 5534, which allows for how exposed the roof is.

Ridge tiles need their own thought, since on a small roof the ridge and hips make up much of what you see. BS 8612:2018 is the specification for ridge, hip and verge tiles that are fixed dry, without mortar, and a conservatory roof with a ridge and hips has more of those junctions than a lean-to.

Published tile lifespans

  • Plain concrete: HomeBuilding 40-50 years
  • Marley: around 60 years for tiles, differing by source
  • Clay: HomeBuilding 60-80 years
  • Clay: a 60-year minimum life expectancy from the BRE

Light, roof windows and the look of the new roof

Solid does not have to mean dark. A tiled roof can carry roof windows, a glazed lantern or full-length glazed strips between the tiled areas, and the room beneath can be as bright as the old one in places, with a ceiling in the rest. The balance of light and solid is a design choice that changes both the price and the temperature of the room.

Glazing in the new roof has to meet Part K. For thermal values, Approved Document L gives one limit for a roof window and a different one for a fixed rooflight, and both are set out in our Building Regulations guide, so the product is chosen against the right figure.

The look of the roof matters to the house, too. The tile colour and shape are chosen to sit with the main roof, and the pitch of the conservatory roof follows the frame, so a tile that suits one pitch may not suit another. Tiles carry minimum pitches that depend on the product, so the maker's sheet is checked before a tile is chosen. Where the house is listed, or sits in a conservation area, the choice is checked with the council before any order is placed.

Each roof window is also a junction where rain and indoor steam both have to be handled. The flashing round the opening, the insulation at its edge and the finish of the ceiling lining all belong to one detail, so the window is chosen with the roof and not added later.

The checks before a tiled roof goes on

A new solid roof is checked with building control before work starts. The Planning Portal says "A new roof must comply with building regulations to ensure it is structurally safe, energy efficient and properly ventilated." Our guide to conservatory roofs and Building Regulations sets out the energy exemption and its five conditions, including that "The heating system of the dwelling is not extended into the conservatory or porch."

On planning, the Portal says: "If the change significantly alters the structure or appearance of the roof, then planning permission may be required." We check the route with the council, or the Broads Authority inside its executive area, before work starts. Building control stays with the district council's team or a registered building control approver.

Where the roof cannot be reached from the garden, scaffolding standing on the highway needs a licence from the county council under section 169 of the Highways Act 1980, and we arrange the licence with our scaffolder.

What it costs is a question for the survey, since the frame, the roof shape and the finish decide it. For a sense of scale, MyJobQuote's guide, last updated on 20 October 2026, gives £3,200 to £6,000 as the 2026 average for a conservatory roof replacement, all roof types together. Our conservatory roof replacement cost guide sets out what moves a price, and the quote you receive is a written total that follows the survey.

Before the first tile is ordered

  1. Have the structure under the roof surveyed
  2. Check the building control route in writing
  3. Check whether planning permission is needed
  4. Choose the tile against its maker's pitch sheet
  5. Agree the ceiling, insulation and roof windows

Tiled conservatory roof questions

Does a tiled conservatory roof need a structural check?

Yes. A tiled roof carries battens, insulation and a plastered ceiling as well, so the structure under it is read before the roof is chosen. The Planning Portal advises a structural engineer or surveyor where a covering is heavier, and a covering 15 per cent or more heavier needs approval.

How long does a tiled conservatory roof last?

Roofing Megastore's managing director, quoted by HomeBuilding, says a tiled conservatory roof will typically last in excess of 50 years with little maintenance being required. Marley puts the typical expected life of roof tiles at around 60 years. Both are published views of tile life and make no promise about your roof.

Can a tiled roof include glazing for light?

Yes. Roof windows, a lantern or glazed strips can be built into a solid roof. The glazing must meet Part K, and the Approved Document L limits differ for a roof window and a rooflight. They are part of the roof, so the building control check covers them, and the survey agrees the size and position with you.

Do I need building control for a new tiled roof?

The Planning Portal says "A new roof must comply with building regulations", so the route goes to building control first. On planning, it says permission "may be required" for a change that alters the roof's structure or appearance in a significant way. Both routes are checked with the council before work starts, and the answer is kept with the quote.

Get a written quote

Tell us about your roof

Hand dressing a lead ridge roll with a wooden bossing stick

10-year workmanship guarantee, in writing

Call WhatsApp Written quote