Two see-through roofs, built in different ways
A glass conservatory roof is made of sealed glazing units, double-glazed in a modern roof, set into glazing bars that run down the slope. Each unit is a pane or a pair of panes, and the bars carry the weight and drain the water that runs off them. The roof looks like a large window, and it behaves like one.
A polycarbonate roof is made of plastic panels that can have a hollow cell structure, held between the same kind of bars. The panels are far thinner than a glass unit, and a roof of them can be put together quickly. The roof is translucent, a diffused glow more than a clear view.
Both depend on the framework as much as the panel. The bars, the seals, the cappings that hold the panel down and the gutters at the eaves are where leaks start, and they are the parts that age first on either roof. A new panel in a worn frame will leak in the same places the old one did.
HomeBuilding sets out three roof choices for a conservatory: glass, polycarbonate or tiled. Glass and polycarbonate are the two that keep light coming from above, so they are the two this page compares. The third, a solid tiled roof, has its own page on tiled conservatory roofs.
Glass and polycarbonate at a glance
Glass
- Sealed glazing units
- Clear view of the sky
- Longer published lifespan
Polycarbonate
- Plastic multi-cell panels
- Diffused, translucent light
- Shorter published lifespan
How long each roof lasts
Published figures are the starting point, and they come from two voices. For polycarbonate, HomeBuilding's own text says: "They have a typical lifespan of 10 years." For glass, the figure comes from Roofing Megastore's managing director, quoted by HomeBuilding: "A glass conservatory roof will likely last in excess of 30 years."
Credit matters here. The glass figure is one trade voice quoted by a magazine, not a test result, and the polycarbonate figure is HomeBuilding's own statement. Neither is a promise about a roof on a particular house, and neither says what happens to the frame, which has its own age.
Set side by side, the figures make a case for working out cost per year of use. A roof that has to be replaced after ten years is a different purchase from one that is expected to be in place for three times as long, even if the first price is lower. The price of the second replacement belongs in the comparison.
Lifespan also depends on how well the roof is looked after. Gutters that are kept clear, seals that are checked and a frame that is kept sound are what let any roof reach the figure it is given, and a roof that leaks into the frame loses life from the inside.
Myth
A published lifespan tells you how long your own roof will last.
Fact
It is a general figure from one source; the frame, seals and care of your roof move it.
Heat, glare and the room in winter
Glass and polycarbonate are both see-through roofs, so both let sunlight in and heat out. The difference is in what each does about it. Glass units can be specified with coatings and with a gas fill between the panes, and tinted or reflective units are made to cut glare and summer heat. HomeBuilding's guide says double-glazed panels with an argon filling are shown to prevent heat escaping during cooler months and to help keep cold air out.
Polycarbonate panels are specified by thickness and by the number of cells inside them. A thicker multi-cell panel holds more air and slows heat movement more than a thin one, and the choice of tint or opal finish changes how much light and heat get through. The panel is a lighter product, so what it can do is limited by what a plastic panel can do.
Neither type turns a glazed roof into an insulated one. A conservatory under glass or plastic stays closer to the weather outside than a room under a solid roof, and hot days and cold nights show it. That is why some owners weigh a third route, a solid roof with roof windows, once they have thought about how the room is used.
Think about the months you use the room. A conservatory used as a summer sitting room asks less of its roof than one used as a year-round dining room or office, and the choice between a clear view and a controlled temperature is a personal one.
Noise, condensation and keeping the panels clean
Rain on a thin panel makes noise. HomeBuilding notes that polycarbonate roofs are lightweight and easy to install but not as durable as glass or tiled roofs, and that in some cases they can let in outside noise, such as heavy rain. A glass unit is a thicker, sealed build that carries rain differently.
Condensation shows on whichever surface is coldest. On a polycarbonate roof, water can collect inside the hollow cells if the ends are not sealed properly, and it shows as dark or misty patches in the panel. On a glass roof, a failed seal in a double-glazed unit lets moisture between the panes, and the misting cannot be wiped away because it is inside.
Cleaning is easier on some surfaces than others. HomeBuilding's guide mentions self-cleaning glass, which has an outer coating that reacts to environmental changes to break down dirt. Pressure is not the answer on any covering: Marley warns that a high-powered jet wash can damage slate and tile surfaces, and the same caution suits panels and seals.
A conservatory roof that is checked from time to time costs little to look after. Algae, leaf litter in the gutter and blocked weep holes are what the check looks for, and each is easier to deal with early.
The frame, the base and the rules for a new roof
A replacement roof lands on the existing frame, so the frame sets what is possible. A frame made for polycarbonate may not suit glass units, and the reverse is true as well, because the bars, seals and fixings differ. Before one is swapped for the other, the frame is read for what it was built to carry, and the survey says whether it needs strengthening.
Glass overhead is a safety matter, and the glazing in a conservatory has to comply with Part K, one of the five conditions in Approved Document L's energy exemption. That exemption applies only while the conservatory is at ground level, no larger than 30 m2, and still kept apart from the house with a wall, door or window, with the house's heating not extended into it.
The Planning Portal says: "A new roof must comply with building regulations to ensure it is structurally safe, energy efficient and properly ventilated." That sentence is about changing the roof of a conservatory, so a swap of one covering for another goes to building control first. Planning is a separate check with the council, since a significant change to the structure or look of the roof can bring it in.
Our guide to conservatory roofs and Building Regulations sets out each condition. Where the work needs scaffolding on the highway, a licence comes from the county council, and we arrange it with our scaffolder.
Before swapping one roof type for the other
- Read the frame for what it was built to carry
- Check the five conditions in the energy exemption
- Check the building control route in writing
- Ask the council about planning
- Agree the panel type and its fixings in writing
Where the cost lands
MyJobQuote reports that the average conservatory roof replacement costs between £3,200 and £6,000 in 2026, in a guide last updated on 20 October 2026, with no VAT basis stated. That range covers every roof type together, so it is a guide to scale and not a price for glass or for polycarbonate. Your own figure follows the survey.
HomeBuilding's guide ranks the three types on price: polycarbonate lowest, glass next and tiled highest, with the type of glass and the roof's size and shape moving each figure. The gap between glass and polycarbonate narrows when the polycarbonate is replaced after ten years, and a glass roof is paid for once over a longer life.
What moves the price on either roof is the same list: the dimensions, the glazing or panel chosen, the condition of the frame and how the roof is reached. Our conservatory roof replacement cost guide goes through them. Once the survey is done, the written quote gives one total price, so any two quotes compare on the same footing.
Send a photo over WhatsApp and it shows the shape, the panel type and the state of the bars, so the survey conversation starts from the real roof.
Repairs: panels, seals and gutters
Not every problem means a new roof. A cracked polycarbonate panel can be replaced on its own where the bars are sound, and a misted glass unit can be replaced without touching its neighbours. A worn seal can be renewed along a bar, and a gutter at the eaves can be re-laid to a fall. Each is a smaller job than a full replacement and costs less.
The question is whether the repair solves the cause. A panel that cracked because the fixings were over-tightened will crack again if the same fixings are used, and a gutter that overflowed because it is undersized will overflow after it is cleaned. The survey follows the water or the crack back to its cause before a repair is priced.
A roof that has been repaired more than once is a sign to weigh up the larger decision. Repairs add to the total spent on a roof that is nearing the end of its published lifespan, and the money might buy more as part of a replacement. The choice between glass, polycarbonate and a solid roof then comes back to the points above: light, heat, noise, the frame and cost.
For a leak that is coming into the room now, a photo on WhatsApp helps to show where it is, and the survey that follows reads the whole roof, not only the spot that was reported.


