The short answer
Yes, for any chimney repair that goes beyond a look from a ladder. Repointing, pot beds, flashing and rebuilds all need a safe working platform at the stack. That can be a smaller chimney scaffold or a full scaffold, and the survey says which one your house needs.
Why a stack needs a platform
Chimney work is done at height, on a small sloping roof, with tools and materials in hand. A person kneeling on a roof slope with a ladder hooked over the ridge has nowhere to put a bucket of mortar, no support if a tile slips and a long fall to the ground. A scaffold gives a flat, guarded platform right at the stack, so both hands are free for the work.
Cutting out joints and refilling them is a two-handed job, and replacing a pot or rebuilding the top courses means lifting heavy items. Work of that size cannot be done safely off a ladder. A short, light task, such as looking at the stack from a ladder at the eaves, may not need scaffold, but anything that touches the brickwork does.
A scaffold also protects the house. It catches falling debris, keeps people away from the foot of the stack and stops tools or old mortar landing on the roof and in the gutters. It also gives a firm place to stand when a brick or a pot has to be carried down, and room to set materials within reach. Without it, every load has to be hauled up a ladder by hand, one trip at a time.
Chimney scaffold or full scaffold
| Option | What it is | Suits |
|---|---|---|
| Chimney scaffold | A frame or tower built to reach the stack alone | A stack within reach of a short run of scaffold |
| Full scaffold | Scaffold up one or more elevations, with boards and ties | Tall houses, steeply pitched roofs or several jobs at once |
| Roof ladder and crawling board | Ladder hooked over the ridge, with a board to spread weight | Short checks, not repairs to brickwork |
A chimney scaffold is a smaller structure than a full one, and it can be enough where the stack sits close to the edge of the roof. A full scaffold becomes the better choice when the stack is set well back, when the roof is high or steep, or when the chimney is only one of several repairs.
The survey decides which one your house needs, taking in the height of the eaves, the pitch, the distance to the stack and what stands at ground level. Whichever it is, it sits inside the single written total you are given.
The licence for the pavement or road
Pavements and roads are public highway. Under section 169 of the Highways Act 1980 nobody may erect or retain on a highway a scaffold that obstructs it without a licence, and that licence comes from the county council, not from the district or borough council.
We arrange the licence with our scaffolder. A scaffold that stands wholly on your own land, and does not obstruct the highway, is a different case, which is another reason the survey looks at where the frame can go before anything is booked.
A licence covers a set period, so a long job can matter. Fees and notice periods are set by each county council for its own area, and your address decides which council that is. If the house stands beside a trunk road, the licence for a scaffold on that road is National Highways' to issue, not the county council's, which is worth mentioning when you ring. Either way the licence is arranged before the scaffold goes up.
Scaffold and the price
Access is one of the few chimney costs with a published pointer. MyJobQuote says a full leadwork replacement on a chimney costs between £350 and £920, depending largely on whether scaffolding is required (22 September 2026). That range is for chimney leadwork only, and it shows how much the platform can move a figure.
At the survey the roof is looked over from ridge to eaves before any price is given, and what you receive in writing is a single figure for the whole job. Where the stack, the roof and the street suit it, several repairs can share one scaffold, so it pays to raise every chimney concern at the survey. Pots, flaunching, joints and lead can then be planned around a single set-up of the access.
See chimney repair costs for dated third-party figures, chimney flashing repair for the lead side, and the chimney repairs hub for the rest.


