Call 01493 277103

Chimney repairs

Replacing a Chimney Pot

A chimney pot is seated in mortar at the head of the stack, and when either one fails the pot has to come off. This page covers what replacing one involves and how a period pot gets matched.

Get a written quote

Call 01493 277103WhatsApp us

A roofer laying new natural slates on a freshly battened roof

The short answer

Replace a pot when it is cracked through, missing pieces or loose in its bed. The old pot comes off, the mortar bed beneath it is rebuilt, and a new pot goes on. A period home may need a pot of the same shape, and one written total price follows the survey.

When a pot needs replacing

A chimney pot is a clay or concrete tube that finishes the flue at the top of the stack. It carries smoke clear of the brickwork and, on a flue left unused, it can be capped. Because it stands at the very top of the house, it takes the full force of rain, frost and wind.

A pot with a crack running down it, a broken rim, a piece missing or a visible lean should be looked at. A crack lets water into the flue and into the brickwork under it, and in a hard freeze the water inside the clay expands and widens the split. A loose pot may drop away entirely, taking tiles and gutters with it as it falls.

From the ground you can see the outline of the pot, any pieces lying in the gutter and any difference in height or angle between one pot and its neighbour. A photo sent on WhatsApp to 07880 284133 is a good way to show what you are seeing before a survey, and it helps us judge what needs checking at the top of the stack.

The bed under the pot

The pot does not sit directly on the brick. It is bedded in a rounded mound of mortar called flaunching, which holds it in place and shelters the top of the stack from rain. When a pot is loose, the fault can lie in this bed and not in the pot itself.

For that reason a pot replacement is planned together with the bed beneath it. Old flaunching that has cracked, shrunk away from the pot or broken up gets chipped out, and a new bed is laid so the pot is firm and rain runs off clear of the brick. Fitting a new pot into a failed bed would only repeat the fault. Our page on chimney flaunching covers that repair on its own.

While the pot is off, the top courses of the stack are visible, so any loose or crumbling brick under it can be seen and dealt with in the same visit.

Replacing a pot, in order

  1. The scaffold or platform is in place at the stack
  2. The old pot is lifted off and the failed bed is cleared
  3. The top courses of brick are checked for damage
  4. A new bed of mortar is laid and the pot set level
  5. The finished bed is shaped to shed rain

Matching a period pot

Chimney pots come in different heights, diameters, profiles and colours of clay, and a pair or row of pots on an older house can look odd if one is replaced with a different shape. If the old pot has survived in pieces, its shape, rim and measurements are the starting point for finding a match.

Supply varies. A matching pot may be available new, may come from a reclaim yard, or may mean choosing the nearest profile and accepting a small difference. Which route fits depends on the pot and the house.

A listed home is a special case. Changes "in any manner which would affect its character as a building of special architectural or historic interest" need listed building consent, and a pot forms part of how a chimney looks. Conservation areas can bring further limits, so the planning route gets checked with the council before work starts. A mismatched pot on a listed stack is a poor place to find that out.

Access, price and what else is looked at

A pot is at the top of the highest part of the roof, so reaching it safely sets much of the price. Scaffold put up over a footway or carriageway falls under the county council's highway licensing, and we arrange the licence with our scaffolder.

Before any price is given, the roof is surveyed and the stack gets a close look: the joints, the lead and the other pots as well as the one that prompted your call. The quote arrives in writing as one figure. What drives it is the pot itself, the access, and whatever bed or brickwork repair the survey turns up, since a rotten bed or a split course under the pot adds to the work. The type of pot also counts, since supply differs between a plain modern pot and a reclaimed period one. For the wider range of figures, see chimney repair costs, and for the rest of the stack, the chimney repairs hub.

Questions and answers

Can a cracked chimney pot be repaired instead of replaced?

A hairline surface crack may not need action straight away, but a crack that goes right through the wall of the pot lets water into the flue and can widen in frost. The survey judges which side of that line your pot is on. A pot with a large break, a missing piece or a loose seat is a replacement, and sticking it back together would not hold in the weather.

Do I need to replace every pot if one is damaged?

No. Only the damaged pot has to go, although a matching replacement keeps a row looking even. If the pots are old and unlike each other already, the nearest match is enough. The others get checked too, because pots on one stack stand in the same exposure and were bedded together.

What about a flue I never use?

A flue put out of use can be finished with a cap in place of an open pot, and it still needs air to move through it so damp does not build up. The separate answer about airing a closed-off flue covers that, and the survey says which finish suits your stack.

Get a written quote

Tell us about your roof

Hand dressing a lead ridge roll with a wooden bossing stick

10-year workmanship guarantee, in writing

Call WhatsApp Written quote