The short answer
Centre-pivot suits a room where you want to reach the outer glass and keep the opening low, while top-hung suits a room where you want more headroom and a clear view out. For a bedroom in a loft, check the escape-window figures before choosing either style.
How each sash moves
A centre-pivot roof window turns on an axis across the middle of the sash. Push the lower half in and the upper half swings out, so the glass ends up roughly level with the roof slope above and below it. On a top-hung window the hinges run along the top of the sash, so the bottom swings outward and upward while a stay or friction arm holds it open at an angle.
Both are fixed to the rafters in a frame and flashed into the roof covering, so the difference is only in the sash and its hardware. The handle also sits in a different place. On a centre-pivot unit it is at the top, where you reach up to it, and on a top-hung unit it sits at the bottom, within easy reach of someone standing below.
Our guide to the types of roof window covers the wider family, with fixed and electric models alongside these two. This page deals only with the choice between the two hinged styles.
A third point that decides a lot is the pitch of the roof and the height of the sill above the floor. A window low in a steep slope behaves differently from one high in a shallow slope, because the sash swings through a different space.
Headroom, view and ventilation
Headroom is the strongest reason people pick top-hung. Because the sash opens outward from the bottom, nothing intrudes into the room, and a person standing beneath the window can lean out without meeting glass. Pivoting a centre-pivot sash brings its lower half into the room, so anything standing directly under it has to leave room for that swing.
A top-hung window opened wide gives a larger gap at the bottom of the frame, which suits a view straight out and down. A centre-pivot window opens evenly at the top and bottom, which gives a smaller gap at each end but airflow through both. That means warm air can leave near the top while cooler air comes in lower, which can help a hot loft room.
- Furniture under the window: top-hung leaves the space clear, centre-pivot swings into it.
- View: top-hung offers the wider outlook from a standing position, centre-pivot a more even one.
- Ventilation: centre-pivot opens at both ends, top-hung opens mainly at the bottom.
- Fitting height: the sill height and the pitch affect both.
Our page on the skylights and roof windows hub explains how the choice fits into a wider roof window job.
Cleaning the outside glass
A centre-pivot sash turns through a half circle, which brings the outside surface of the glass indoors where it can be wiped. That removes the need to lean out of an opening on a sloping roof, which makes the style a sound pick for a window that cannot be reached from outside.
A top-hung window does not rotate. The outer pane has to be reached from outside, or with a pole passed out through the open gap, and a person leaning over a pitched roof is at risk of a fall. If roof access is awkward, that alone can decide between the two.
On the covering round the frame, Marley advises against a jet wash: "The use of high powered jet washes is not recommended as it can damage the surface of the slate or tile, thus reducing its expected life considerably". Wipe the glass, and leave the tiles alone. Our page on cleaning roof windows covers the methods in more detail.
Using a roof window as the way out of a loft room
A loft conversion brings a fire safety rule into the choice. Approved Document B Volume 1 expects a storey up to 4.5 m above ground to have an external door, a direct route to a protected stairway or an emergency escape window. Paragraph 2.10 describes what counts as the escape window.
Paragraph 2.10 sets 0.33 m² as the least openable area, 450 mm as the least height and width, and 1100 mm as the greatest height of the lower edge above the floor. A sash opening only a little, or one sitting high on the slope, may miss those figures, so the style and the sill height are agreed together with building control. The council's building control team, or a registered building control approver, confirms it.
A window in a side-elevation slope carries its own permitted development condition: it must be obscure-glazed, and non-opening unless the part that opens sits more than 1.7 metres above the floor of the room in which the window is installed. An escape window and an obscure-glazed side-slope window are different requirements, so check both. Our guide to Building Regulations for roof windows sets out where each one applies.


