The short answer
Per Sandtoft's own sheet, its clay Old English Pantile weighs 41.6 kg per m² as laid. That is one product from one maker, so another pantile needs its own sheet. Weight matters on a re-cover because a covering 15 per cent or more heavier needs Building Regulations approval.
What the Sandtoft sheet says
Wienerberger's Sandtoft range carries a product data sheet for the clay Old English Pantile, version 1.1, dated 02/04/2025. Under the heading Material it lists Clay, and its entry for weight reads "Weight as laid 41.6kg per m2". On the same sheet: minimum pitch 30 degrees, headlap 75 mm, fixed batten gauge 290 mm.
The words "as laid" matter. The figure is stated per square metre, in place on the roof. It belongs to this pantile only. A different maker's clay pantile, another profile or a concrete pantile will have its own number on its own sheet.
For an idea of scale, 41.6 kg per m² over a 10 m² patch of roof comes to 416 kg, and over a 50 m² slope to 2,080 kg. That is the covering alone, so it says nothing about the battens, the underlay or anything else on the rafters. The arithmetic is simple, and the sheet figure is the part to rely on.
Why weight matters on a re-cover
The timbers of a roof are sized for the covering first laid on them. A new covering that weighs a good deal more adds load to rafters, purlins and walls, and the building rules treat a significant increase as a structural matter. The Planning Portal says that using a new covering material which increases the weight of the roof covering by "15 per cent or more" calls for Building Regulations approval.
Approved Document A words it differently: a significant change in roof loading is when the loading upon the roof is "increased by more than 15%". The two wordings are not identical, and we name whichever one we are applying. On weight, the Portal's page says "you are advised to check with a structural engineer or surveyor before commencing with works".
The comparison is between the old covering and the new one on the same roof. That is why a figure like 41.6 kg per m² is useful only alongside the weight of whatever it replaces, and why the name of a material cannot tell you whether a change is over the line. Our guide to re-roofing in clay pantiles covers how a clay re-cover is checked.
Myth
A tile's weight is the same whichever maker it comes from.
Fact
Each product has its own data sheet figure, and the sheet is the source.
Checking the roof before the tiles go on
Before a covering is chosen, the structure under it is looked at. The survey checks the rafters, the battens and the walls they bear on, for sagging, splits and signs of past movement, and we report what we found in plain words. Where a heavier covering is being considered, the Portal's advice about a structural engineer or surveyor applies, and the figures from the data sheets of both coverings go to that person.
- The weight of the existing covering, from its data sheet or by measurement
- The weight as laid of the proposed covering
- The condition of rafters, battens and bearings
- Any sag or movement along the ridge line
A like-for-like clay re-cover is a different question from a swap. If you are weighing the two materials, our guide to clay and concrete pantiles sets out how they compare, and the weights are compared sheet by sheet, not by material name.
Weight and the rest of the price
Weight does not set the price directly, but it shapes the work. A covering that needs the structure strengthened adds work beneath the tiles, and lifting heavy material onto the roof can change the access needed. Those are reasons why neighbouring roofs of the same size can come out at quite different totals, and a survey is how the difference is found. Where the structure is sound and the covering is a like-for-like clay one, the work is simpler, and the survey says which case applies to your roof before any figure is given.
For the published ranges, Which? Trusted Traders set an average three-bedroom house's replacement roof at £7,000 to £21,000, excluding VAT (November 2025). HomeBuilding, last updated 30 September 2025, gives approximate lifespans of 60 to 80 years for clay tiles. Neither says anything about weight, and your own figure follows the survey.
More on what goes into a pantile roof is in our guide to what a pantile roof is, and the wider tiled roof work we do is on the pitched roofing page.


