Call 01493 277103

South Walsham, 11.2 road miles west

Roofers in South Walsham

South Walsham is an 18-minute drive from Great Yarmouth, 11.2 road miles to the west. Every roof there begins with a survey of the whole thing, you are told in ordinary language what turned up, and the council confirms the planning and building control route first.

Get a written quote

Call 01493 277103WhatsApp us

Rear slate roofs and chimneys of Victorian terraces
New-build brick and render estate houses with grey tile roofs

Two Grade-listed churches and a ruined west tower

  • St Mary's, St Lawrence's, tower

    South Walsham's Church of St Mary is listed at Grade I (National Heritage List entry 1372682, first listed 25 September 1962). The Church of St Lawrence is listed Grade II* (entry 1051496), and the remains of its west tower are listed Grade II (entry 1153143, first listed 25 September 1962).

    Nine listed buildings lie nearby in all. For any of them, listed building consent is a council matter, and a roof survey describes what the slopes, the lead details and the framing need.

  • A Broadland address, CNC sign-off

    Broadland District Council decides planning for South Walsham houses. For a specific address, check with Broadland District Council about any conservation area or Article 4 direction that might apply, before a covering or window is changed.

    Building regulations work goes to CNC Building Control or a registered approver, never to the planning team. That separation holds for a small repair as much as a whole roof, so a form for one body does not cover the other, and the roof survey proceeds in the meantime.

  • Land by the waterside

    South Walsham lies outside the Broads executive area, with the boundary nearby. A plot beside a broad, a dyke or marsh might be Broads Authority land, so the address settles planning there.

    Flood risk is per site: GOV.UK's long-term flood risk service shows an area, and an application relies on the flood map for planning.

South Walsham: who decides what

  • Planning: Broadland District Council. Waterside or marsh edge plots may be Broads Authority land: check the address.
  • Building control: CNC Building Control, a five-council partnership run from Norwich, 0808 168 5041.
  • For conservation areas or Article 4 at your address, check with Broadland District Council.
  • Church of St Mary, Grade I: faculty system. Church of St Lawrence, Grade II*: ask the council.

The planning guide gives the permission tests, and we check with the council which route applies to your South Walsham address before work begins.

Map of South Walsham and the places nearest to it. Map tiles © Esri; map data © OpenStreetMap contributors.

Ask it straight · South Walsham

South Walsham roofs: churches, lead, pantile specifications, roofline costs

South Walsham parish had 822 usual residents at the 2021 Census, and the village has two listed churches and the ruins of a tower. The four answers cover how those churches are approached, what leadwork lasts and how it is graded, what a manufacturer says about pantile pitch and fixing, and what gutters and fascias cost. Upton, Blofield Heath, Acle and Blofield are its closest neighbours.

Which route applies to St Mary's and St Lawrence's in South Walsham?

The short answer

St Mary's, a Church of England church in regular use, is dealt with by faculty. For St Lawrence's and its tower remains, ask the council which route applies.

St Mary's carries a Grade I listing (entry 1372682, first listed on 25 September 1962). It belongs to the Church of England and is in use, which brings the ecclesiastical exemption in place of listed building consent; works are authorised by faculty. It sits in the Diocese of Norwich, where a parochial church council considering a roof repair starts its request.

The exemption is narrower than people assume. It stands in for listed building consent and for nothing else, so Broadland District Council still has to rule on planning for the exterior, and building control stays with CNC Building Control or a registered approver. A faculty does not settle either of those two questions, and the three bodies are asked separately.

The Church of St Lawrence is listed Grade II* (entry 1051496) and the remains of its west tower Grade II (entry 1153143), the second first listed on 25 September 1962. Those entries give grades only, so which consent route governs works there is something to confirm with Broadland before anyone orders materials. Whichever building it is, the roof gets the same full survey, and what it shows is reported in plain words: covering, leadwork, gutters, timbers and any movement at the wall head.

Listed entries in South Walsham

  • Church of St Mary, Grade I, entry 1372682
  • Church of St Lawrence, Grade II*, entry 1051496
  • Remains of its West Tower, Grade II, entry 1153143
  • Nine listed buildings nearby

What lifespan can South Walsham lead flashing reach?

The short answer

MyJobQuote says correctly installed flashing in lead can last for over 80 years. Codes 3 to 8 grade the sheet, and the specification sets the code.

MyJobQuote's page on chimney leadwork says that lead flashing that is correctly installed "can last for over 80 years", and adds a figure of over 100 years for higher codes. That wording matters: the life belongs to the installation, with the lead only one part of it. A chimney flashing needs a stepped upper edge, a clean fixing and a joint that does not trap water, and all of that sits outside the metal itself.

Sheet is graded from code 3 to code 8. Leadworx, a maker of lead flashing, notes that the Lead Sheet Training Academy (LSTA) sets the codes and that they comply with BS EN 12588, and it reports that code 4 has become the standard choice for general flashing work. Its table lists code 3 for soakers and light duty, code 4 for light duty and general work, code 5 for general, vertical and pitched work, code 6 for large roofs and codes 7 and 8 for heavy duty.

A South Walsham chimney is therefore specified detail by detail. The code for a soaker is not the code for a large valley. Prices for chimney leadwork alone are MyJobQuote's: around £200 for a patch and around £570 for a full replacement, within a band of £350 to £920 depending largely on whether scaffolding is required (22 September 2026). Our lead roofing and leadwork page covers the wider range of jobs.

Lead code uses, per Leadworx

  • Code 3Soakers and light duty.
  • Code 4Light duty and general; the standard for flashing.
  • Code 5General, vertical and pitched work.
  • Code 6Large roofs.

What do manufacturers say about pantile pitch and fixing?

The short answer

Sandtoft gives its clay Old English Pantile a minimum pitch of 30 degrees; Marley lists 15 degrees for its Lincoln clay pantile. Always read the product sheet.

Pantiles can be clay or concrete, and every product carries its own figures. Sandtoft (Wienerberger) gives its clay Old English Pantile a minimum roof pitch of 30°, a headlap of 75mm, a fixed batten gauge of 290mm and a weight as laid of 41.6kg per m2. Marley lists 15° for its Lincoln clay pantile and 25° for its concrete Anglia. Canterbury and Anglia are Marley product names, not places.

Because the numbers differ by product, the survey measures the pitch and identifies the tile before anything is priced, and a covering that is wrong for the pitch is flagged. BS 5534:2014+A2:2018 is the current code for slating and tiling, and BS 8612:2018 is the dry-fix standard for ridge, hip and verge parts. Marley says installing to BS 5534 "isn't required by law", and that since the 2015 amendments mortar "could no longer be relied upon as the only means of securing the roof covering".

Exposure comes into fixing too. Marley says fixings follow a site-specific fixing specification under BS 5534, taking account of how exposed the roof is and its local topography, and ridge or hip tiles are mechanically fixed. None of this says what share of local roofs carry any one tile; it says only what each product asks of the roof beneath it. Our guttering, soffits and fascias page sits beside it for the edge detail.

Two clay pantiles, two pitches

Sandtoft

  • Old English Pantile, clay
  • Minimum pitch 30°
  • Headlap 75mm

Marley

  • Lincoln clay pantile
  • Minimum pitch 15°
  • Check its product sheet

What do gutters, fascias and soffits cost around South Walsham?

The short answer

Third-party guides give £75 to £350 for clearing gutters, with an average of around £1,000 to £1,600 for replacing them and around £800 for capping fascias and soffits.

These are published guides, not our prices. For "Clear out all gutters at front and back of property", Which? Trusted Traders give £75 to £350, based on a survey of 11 traders in November 2025 and excluding VAT. On MyJobQuote's figures, replacing gutters averages around £1,000 to £1,600 in the UK and capping fascias and soffits averages around £800; neither page states a VAT basis.

Gutters have a job beyond collecting water. Brett Martin's advice is a downward fall of 1mm for every 600mm toward the outlet, so a run that sags holds a pool at the middle and spills over the front edge. A fascia that has softened cannot hold a bracket properly, and a soffit board is among the places HSE lists for asbestos insulating board on older buildings, so a white board under the eaves is looked at before anyone drills into it.

A retailer says uPVC roofline products "can typically maintain reliable performance for between 20 and 40 years" when installed correctly, a retailer's claim rather than a standard. The survey looks at the whole line from the gutter back to the wall plate, brackets and outlets included, and the written quote after it is one total price.

Published guide figures, with sources

All gutters cleared (Which?, Nov 2025, excl. VAT)£75 to £350, all gutters
Gutter replacement (MyJobQuote, 20 Oct 2026)average, around £1,000 to £1,600
Fascia and soffit capping (MyJobQuote, 17 Sep 2026)average, around £800

Which? Trusted Traders, November 2025, prices exclude VAT; MyJobQuote pages dated as shown, no VAT basis stated.

South Walsham tiles, lifespans, claims, complaints, slate

Does a new covering on a South Walsham roof need a structural check?

When it is much heavier, yes. Approval is required, the Planning Portal says, where a new covering weighs 15 per cent or more above the old covering, and it recommends a structural engineer's or surveyor's check first. Approved Document A treats a loading increased by more than 15% as a significant change. No weight is assumed for any covering: the survey identifies what is there.

How long do clay and slate roofs last near South Walsham?

HomeBuilding (last updated 30 September 2025) gives approximate lifespans of 100+ years for Welsh slate, 75-100 for Spanish slate, 50-80 for reclaimed Welsh and 60-80 for clay tiles. Marley reports that the BRE determined a minimum life expectancy of 60 years for clay tiles, and Marley gives around 60 years as a typical life for roof tiles, adding that this is no promise about an individual roof. HomeBuilding gives plain concrete 40-50 years. Our slate roofing page has more.

My insurer turned down my South Walsham roof claim: where next?

Take the complaint to the insurer first. For most complaints a business has up to 8 weeks to consider it, according to the Financial Ombudsman Service, and "You have 6 months from the date on the final response" to go further, on 0800 023 4567. The Ombudsman says it will usually look at expert reports and photos, so keep any taken before repairs.

Who do I call about a poor roofing job in South Walsham?

The Citizens Advice consumer helpline, on 0808 223 1133, gives consumer advice, and Trading Standards does not advise individuals. The Consumer Rights Act 2015, in section 49, sets the standard: "Service to be performed with reasonable care and skill". The helpline can also pass information about complaints on to Trading Standards, which a householder cannot do alone.

What might a natural slate roof on a South Walsham home cost?

MyJobQuote puts the average cost of fitting a slate roof at around £7,800 (page dated 6 October 2026, with no VAT basis stated). HomeBuilding says Welsh slate might reach £18,000 on its example house, a three-bedroom semi with a 65m2 roof. Each South Walsham quote is one total price after a survey, since pitch, access and the condition of the timbers decide the figure.

Within three miles of South Walsham

A South Walsham roof quote

Tell us about your roof

10-year workmanship guarantee, in writing

Call WhatsApp Written quote