Call 01493 277103

Rollesby, 7.1 road miles north-west

Roofers in Rollesby

Rollesby is a north-west village, 7.1 road miles out from Great Yarmouth. For a repair or a re-roof here we survey the entire roof, report back plainly on what we found, and establish which authority handles planning for your address before work begins.

Get a written quote

Call 01493 277103WhatsApp us

A hipped bungalow with a newly tiled roof
Concrete tiled estate rooftops towards green hills

Rollesby roofs and the Broads boundary

  • Plots inside the Broads line

    A slice of Rollesby lies within the Broads Authority's executive area. For land inside it, planning goes to the Broads Authority (01603 610734), while Great Yarmouth Borough Council handles the remainder of the village. Quote your full address to whichever office you ring first.

    Our survey is identical either side of the boundary: the slopes, the ridge and verges, flashings, gutters, and whatever timber is visible from inside the loft. Each part is given a plain verdict, and the planning route is settled alongside it. If a plot straddles the line, we ask both offices.

  • Sowells Farm and neighbours

    Three listed buildings lie nearby. The Barn at Sowells Farm is Grade II (National Heritage List entry 1372913, first listed 4 December 1987), and The Old Court House (entry 1051026) and The White House (entry 1152490) carry Grade II as well.

    Roof changes on a listed house call for listed building consent where they touch its character. Which office grants it depends on where the property stands, so the Broads Authority or the borough council, as the address dictates.

  • Checks before a re-cover

    Rollesby and neighbouring Martham each have a conservation area designated by Great Yarmouth Borough Council. Ask the council whether one reaches your Rollesby address before you alter the covering or add a roof window. The answer can change what a new material needs, so we ask early.

    An Article 4 direction can remove further permitted development rights, so check with the council first. Flood risk is a per-site matter too, and for a planning application the Environment Agency's flood map for planning gives the site's flood zone. GOV.UK's long-term flood risk service describes an area, never a single home.

Who decides roof work in Rollesby

  • Planning: the Broads Authority for land inside its executive area, the borough council elsewhere. Check your address.
  • Building control: Great Yarmouth Borough Council's building control team, or a registered approver.
  • Conservation area: ask Great Yarmouth Borough Council whether one covers you; Martham has one nearby.
  • Grade II listings nearby, like the Sowells Farm barn, need listed building consent for changes touching character.

Our planning guide sets out the permission tests for roof work; for a Rollesby address, the council confirms which route applies.

Map of Rollesby and the places nearest to it. Map tiles © Esri; map data © OpenStreetMap contributors.

Ask it straight · Rollesby

Rollesby roofs: a split parish, a listed barn, scaffold fees and asbestos

Rollesby parish had 936 usual residents at the 2021 Census. Planning here can sit with either of two offices, while building regulations stay with one team. Four answers follow, each naming who rules on a different part of the job. Close neighbours include Fleggburgh, Martham, Filby and Hemsby.

Which office rules on a roof change at my Rollesby address?

The short answer

The Broads Authority for land inside its executive area, Great Yarmouth Borough Council for the rest. Building control goes to the borough council's team in both cases.

The Broads Authority describes its job in one sentence: "We are the local planning authority for all land and properties within our executive area". Part of Rollesby falls inside that area. A planning question on a plot there, such as a new covering that changes how the roof looks, is put to the Authority, not the borough.

Elsewhere in the village Great Yarmouth Borough Council decides. Riverside and marsh ground can fall on either side of it. The boundary cuts across the parish, so a street name tells you little. A map reference for the address settles it, and we ask the relevant office before the work is priced, because an answer from the wrong office wastes everybody's time and can send a plan back to the start.

Building regulations ignore that split altogether. The Authority has national park status but decides planning only, which means a re-roof on land inside its area is still checked with Great Yarmouth Borough Council's building control team, or with a registered building control approver instead. Our roof replacement page describes the whole-roof route, from stripping to the new covering. A conservation area or listed building adds a further question on top, but never replaces these two.

One parish, two planning offices

Inside the line

  • Inside its executive area: Broads Authority
  • Check the address
  • Building control: borough team

Outside the line

  • Elsewhere: Great Yarmouth Borough Council
  • Same building control team
  • Check the address

Does stripping and re-covering a Rollesby roof need approval?

The short answer

A whole-roof strip does, since it affects more than 50 per cent of the roof. Repairs kept within both Planning Portal limits normally need none.

The Planning Portal supplies the test. No building regulations application is normally needed where "Less than 25 per cent of the total 'building envelope'" is affected and "Less than 50 per cent of the roof is affected". Both conditions must hold together. Taking a Rollesby roof back to its battens clears the second one, whatever the replacement covering turns out to be.

Weight is a separate trigger. If the new covering is "15 per cent or more" heavier than the old, building control approval is required, and the Planning Portal suggests a structural check beforehand. That is the reason we study the rafters and wall plates beneath the present covering rather than only the surface visible from the lawn. A covering that behaves very differently in a fire is the other reason for the approval route.

For a Rollesby address, check with Great Yarmouth Borough Council's building control team, or hire a registered building control approver. A handful of slipped tiles or a failed stretch of ridge sits well under both limits, and our roof repairs page describes that kind of job. Larger work is scoped from inside the loft and from outside, so the timbers are seen and not assumed.

What a Rollesby survey looks at

  • Cracked, slipped or missing covering
  • Ridge bedding and open joints
  • Verges, valleys and their linings
  • Flashings at walls and stacks
  • Underlay, battens and rafters from the loft
  • Gutters and downpipes

What changes when the Rollesby roof belongs to a listed barn?

The short answer

Listed building consent covers roof work that would alter the building's character, whatever the building is used for. The Barn at Sowells Farm is Grade II.

The Barn at Sowells Farm is listed Grade II (entry 1372913). A listed home keeps its ordinary permitted development rights, but the law asks for consent for anything done "in any manner which would affect its character as a building of special architectural or historic interest". Even replacing the covering, adding a ridge detail or cutting a rooflight into a slope can each change that character.

The local planning authority for the site grants the consent. Because Rollesby is divided, the first job is to establish whether the barn or house stands inside the Broads Authority's executive area. The Old Court House and The White House, both Grade II, raise exactly the same question for their owners.

A listed roof still receives the whole-roof survey, working inward from the covering to the rafters, so the price rests on what is really there. Where a covering looks old, the council is asked about like-for-like repair before anything is specified. Slopes in clay tile, concrete tile or slate are each worked differently, and the survey notes which one a roof carries before any method is proposed. The roof is looked at from the loft too, because a listed building can hide its oldest timbers there, and a repair that leaves those alone is the aim wherever the council agrees.

Order of checks on a listed roof

  1. Confirm the list entry and its grade
  2. Find which planning office covers the site
  3. Ask whether the change touches character
  4. Survey the whole roof
  5. Work out the method with the council

Rollesby scaffold over the road: what does the licence cost?

The short answer

Norfolk County Council charges £178.33 for the first 28 days, then £178.33 for every later 28-day period. We arrange the licence with our scaffolder.

A scaffold over a footway or carriageway requires a licence under section 169 of the Highways Act 1980. In Rollesby the body to ask is the county, Norfolk County Council, not the borough council. Norfolk County Council's page asks you to "Please allow 7 calendar days for applications to be processed."

Norfolk County Council sets the fee at £178.33 for the first 28 days, and each later 28-day period costs the same. Each new scaffold means a fresh application. Should the work outlast the first period, the licence is extended, so the frame need not come down part way through. We arrange the licence with our scaffolder; scaffold is part of the written quote.

Outbuildings raise a disposal question. Norfolk County Council does not accept any asbestos at its recycling centres. HSE advises you to "assume that there is asbestos" in a building built or refurbished before 2000, and to "Use a lockable skip for asbestos". Sheets that have broken up become notifiable non-licensed work, a category the survey flags before a price is written. Leave a broken sheet where it lies until the material has been identified, and keep fragments out of the ordinary rubbish. A garage or shed roof can be looked at on the same survey as the house, so its sheets are known about before any price.

Myth

Cracked cement roof sheets from a shed can be dropped at the nearest recycling centre.

Fact

Norfolk County Council takes no asbestos at its recycling centres.

Rollesby roofs: gales, gutters, bats and chimneys

Slates slipped on my Rollesby house in a gale: where do I start?

Photograph the damage from the ground, leaving everything where it landed, and only then contact your insurer. The Financial Ombudsman Service says "we'll usually look at expert reports and photos". A picture sent to 07880 284133 on WhatsApp gets looked at by us as well. Our emergency roof repairs page explains emergency make-safe work while a proper repair is arranged.

Why does the gutter on my Rollesby house spill at one corner?

The gutter may no longer fall to its outlet. Brett Martin gives the fall towards the outlet as "1mm for every 600mm", so a sagging bracket or a clogged outlet leaves water standing and tipping over at the low point. The survey checks brackets, joints and outlets together, and the gutter is repaired or replaced according to what it shows, whether a single bracket, a leaking joint or a whole run. Fascia boards behind a long-standing leak are looked at too.

Can I take the chimney breast out of my Rollesby semi?

Removing a chimney breast always needs Building Regulations approval, because it is part of the structure. Share the breast with next door, and the Party Wall etc. Act 1996 asks the building owner to give notice at least two months before the date on which the proposed work will begin, which is well ahead of any scaffold going up. Taking out the breast also leaves the chimney stack above to be supported or removed, so the roof is surveyed around the stack before the work is planned.

Should an older Rollesby roof be checked for bats before repairs?

It is worth raising. The law protects bat roosts regardless of what the person damaging them intended, and Natural England licences can be needed for activities such as "repairing or replacing a roof". A bird's nest has its own protection under the Wildlife and Countryside Act 1981, which bites when someone acts "intentionally" and the nest is "in use or being built". If you have seen bats or droppings near the eaves, mention it when you book the survey, so the question is settled before any covering is lifted.

How is a Rollesby roof job priced?

The roof's size, the covering chosen, how it is reached and whatever the survey finds beneath. For scale, Which? Trusted Traders put an entire new roof on an average three-bedroom house at £7,000 to £21,000 excluding VAT, from a survey of 11 traders in November 2025. A written quote then fixes one total for your own roof.

Price a roof near Sowells Farm

Tell us about your roof

10-year workmanship guarantee, in writing

Call WhatsApp Written quote