What does exposure mean for fixing a Walcott roof covering?
The short answer
Set by BS 5534, calculated for the site's exposure. Marley notes that standard "isn't required by law", yet the covering can no longer depend on mortar alone.
Walcott sits beside the coastline, and exposure is the single coastal factor that alters a roof specification. The method, under BS 5534 (which governs slating and tiling), is that fixings on a roof here follow the exposure of the site, as BS 5534 sets out. Openness of the plot, the height of the roof and its surroundings all feed in, so two Walcott roofs can carry quite different fixing schedules and a neighbour's figure tells you nothing.
Marley's guidance says that installing to BS 5534 "isn't required by law", and that since the 2015 amendments mortar "could no longer be relied upon as the only means of securing the roof covering". Ridge, hip and verge parts that were once bedded in mortar alone get a closer check on what actually holds them down. BS 8612:2018 is the reference for how ridge, hip and verge systems are fixed without mortar, so it applies to that kind of part. A ridge tile that rocks or rattles in wind is worth a photograph early.
Our survey looks at what is holding each part and whether it is sound. Where bedding has perished or a fixing is missing, you are told in plain words, along with the gutters and flashings beside it. GOV.UK's coastal erosion map is a different tool, aimed at the estimated risk for an area under the current Shoreline Management Plans. See pitched roofing for the covering work itself.
Looked at on a Walcott pitched roof
- Fixings along every course and eaves line
- Ridge, hip and verge parts, and how held
- Underlay and battens, seen from the loft
- Flashings at stacks and wall junctions
- Gutters, brackets and fascia boards


