How are tile fixings chosen for a roof this near the coast?
The short answer
Fixings are calculated for the site's exposure under BS 5534. That standard is current, though Marley notes that installing to it is not required by law.
Happisburgh stands close to the coast, and it is exposure, above all, that changes what a roof specification asks for. Fixings are calculated for the site's exposure under BS 5534, which is the British Standard for slating and tiling. The figure comes from the site itself: how open it is, how high the roof stands and what surrounds it. Two houses on one road can need different fixing schedules, so the figure is set per roof.
Marley says installing to BS 5534 "isn't required by law", and that since the 2015 amendments mortar "could no longer be relied upon as the only means of securing the roof covering". Put plainly, the standard no longer relies on bedding mortar as the only thing holding a ridge or verge tile, so the specification for each one includes a mechanical fixing.
At the survey we read the roof from inside and out, then say what needs fixing and what can stay. Where a village roof has older bedding, the survey looks at whether it is sound, whether the tiles beneath are secure and what the covering needs next. GOV.UK's coastal erosion map is a separate tool, giving the estimated risk for an area under the current Shoreline Management Plans.
Looked at on a Happisburgh slope
- Fixings on each tile course and at the eaves
- Ridge and verge tiles, and how they are held
- Underlay and battens beneath the covering
- Flashings at chimney stacks and wall abutments
- Gutters, brackets and the fascia behind them


