Does a Rackheath re-roof need building regulations approval?
The short answer
Yes for a full re-roof, which touches over half the roof. A small repair normally needs none inside both Planning Portal limits and with no heavier covering.
The Planning Portal sets a two-part test, and a repair has to pass both parts. No application is normally needed where "Less than 25 per cent of the total 'building envelope'" is affected and "Less than 50 per cent of the roof is affected". Stripping a Rackheath roof back to bare rafters and recovering every slope goes beyond the second limit, whichever covering goes on.
A heavier covering is the other trigger. The Portal asks for approval when the new covering adds "15 per cent or more" to the weight of the old one, and it suggests a structural engineer or surveyor looks first. For a Rackheath address, an application goes to CNC Building Control, a partnership of five councils (South Norfolk, Norwich City, Broadland, King's Lynn & West Norfolk and Fenland); Rackheath callers reach its Norwich office on 0808 168 5041. A registered building control approver is the alternative.
CNC's FAQ adds a line about thatch: "If the repair work is significant, or the building is thatched then the Building Regulations may apply." For a neighbour with a thatched roof in Rackheath, that line points to CNC Building Control as the first call. Smaller repairs on slated or tiled roofs are covered on our roof repairs page, and any job that sits on the borderline is raised with CNC before work begins. The answer then comes from the building control team, not from a guess about what the percentages might allow.
What the Rackheath survey reads
- Loose, split or absent tiles and slates
- Bedding along the ridge line and hip ends
- Mortar and dry-fix parts at the verges
- Lead or mortar valleys, and stack flashings
- Rafters and battens, seen from inside the loft space


