Call 01493 277103

Ormesby St Margaret, 5.7 road miles

Roofers in Ormesby St Margaret

Ormesby St Margaret is 5.7 road miles north of Great Yarmouth, with a conservation area, a Grade II* church and a Grade II* hall in the parish. Repairs, re-roofs and leadwork there start from a full roof survey and the right council question.

Get a written quote

Call 01493 277103WhatsApp us

Pair of 1930s semis in Durrington with weathered clay tile roofs
A clay ridge re-laid on a dry-fix system, clipped and screwed down

Hall, church and conservation area at Ormesby

  • Church and hall listings

    St Margaret's church in Ormesby carries a Grade II* listing (National Heritage List entry 1227867, first listed 25 September 1962), and so does Ormesby Old Hall (entry 1287569, first listed 20 February 1952). Ormesby Lodge (entry 1227898) is Grade II, and eleven listed buildings lie nearby.

    Whether a neighbouring entry matters to you is a fair question. It does not, unless your own building is listed, and then consent is required for roof work that changes its character. The council can confirm whether your own address is on the list, which takes a short call.

  • If your street is covered

    Great Yarmouth Borough Council has designated the Ormesby St Margaret Conservation Area, so the village has one. Which streets fall inside it is something the council can tell you in a short call; the village name alone settles nothing.

    A house inside the area and one outside it get the same roof survey. The difference lies in whose agreement is needed before a covering is altered, and where permission is needed, that is settled first.

  • Scratby, Hemsby and Filby

    Scratby lies closest, then Hemsby, Filby and Caister-on-Sea. The parish is Ormesby St Margaret with Scratby, and it counted 4,392 usual residents at the 2021 Census, a figure that covers both villages together and not Ormesby alone. Every nearby village has a page of its own on this site.

    Scratby and Hemsby have their own pages. Here the checks are listings, the conservation area and the lead, along with the survey of covering and timbers that every roof receives, from the ridge down to the eaves gutter.

Ormesby St Margaret: council, listings and Article 4

  • Planning: Great Yarmouth Borough Council decides. The village lies outside the Broads executive area.
  • Building control: check with Great Yarmouth Borough Council's building control team.
  • The Ormesby St Margaret Conservation Area, designated by the council, is in the village.
  • Check with the council whether an Article 4 direction applies.
  • St Margaret's church, Grade II*: faculty system. Ormesby Old Hall, Grade II*: listed building consent.

Our planning guide explains when permission is needed; for your address the council is asked before work is agreed.

Map of Ormesby St Margaret and the places nearest to it. Map tiles © Esri; map data © OpenStreetMap contributors.

Ask it straight · Ormesby

Hall, church, conservation area and lead at Ormesby St Margaret

Ormesby St Margaret with Scratby parish had 4,392 usual residents at the 2021 Census. This village holds two Grade II* buildings, a conservation area and eleven listed buildings nearby. The four answers below sort out who approves what, then turn to lead flashing and the life of a covering. Listings and the conservation area decide who is asked before the work.

Ormesby's church and Old Hall are both Grade II*: same rules?

The short answer

St Margaret's church, in use, goes through the faculty system, but Ormesby Old Hall needs listed building consent from the council. Planning permission applies to both.

Both buildings carry the same grade, but not the same route. St Margaret's is a Church of England church in use, so roof work on it is authorised under the ecclesiastical exemption, through the faculty system of the Diocese of Norwich. That system takes the place of listed building consent and nothing else. The diocese and the council are therefore different offices answering different questions about the same grade.

Ormesby Old Hall is listed Grade II* (entry 1287569). It is not a church, so listed building consent is its route: it is required for works "in any manner which would affect its character as a building of special architectural or historic interest", and Great Yarmouth Borough Council, as the local planning authority, grants it.

Planning permission for exterior work stands apart from both consents and still applies to each building. Ormesby Lodge, Grade II, follows the hall's route. On the survey side nothing changes: covering, lead, gutters and timbers are read in full, and the findings are explained before a price is set. Neither building is priced from a distance, since a roof of that kind has to be read from the roof itself, and from the loft beneath it.

Two Grade II* buildings

St Margaret's church

  • Faculty system, not listed consent
  • Diocese of Norwich
  • Planning permission separately sought

Ormesby Old Hall

  • Needs listed building consent
  • Granted by the council
  • Planning asked as well

My Ormesby house may be in the conservation area: what to ask?

The short answer

Ask Great Yarmouth Borough Council three things: whether the address is inside the conservation area, whether it is listed, and whether an Article 4 direction applies.

The council designated the Ormesby St Margaret Conservation Area, and a house can be inside it, outside it, or listed on top of either. The council answers all three questions from the address. Whether a covering can be changed, or a roof window added, depends on those answers, so they come before a quote is accepted and not after. A neighbour's answer is no guide, because two houses side by side can differ.

Only Great Yarmouth Borough Council can say whether a direction reaches an Ormesby address, and what any direction covers is set out in the direction itself, not in a summary. For roof work, check with the council whether an Article 4 direction applies to the house and the work proposed, and ask in writing if a purchase depends on the answer.

A conservation area does not mean a roof cannot be repaired. It means the question goes to the council first. Great Yarmouth Borough Council is asked about the route before any work starts, and the survey meanwhile sets out what the roof needs, part by part, so the council's answer rests on the actual job. Ask for the reply in writing if a sale or a mortgage depends on it.

Three questions for the council

  • Is my address inside the conservation area?
  • Does a listing apply to my house, and at what grade?
  • Does an Article 4 direction apply here?

Which lead code goes into the flashing around an Ormesby stack?

The short answer

The specification sets the code for each detail. Leadworx says Code 4 has become the standard choice for general flashing work.

Lead for roofing comes in codes 3 to 8, set by the LSTA and compliant with BS EN 12588, according to Leadworx, a lead flashing maker. Code 3 is 1.32 mm and 14.97 kg per square metre, and Leadworx lists it for soakers and light duty. Code 4 is 1.80 mm and 20.41 kg per square metre, listed as light duty and general. Heavier codes carry more weight per metre.

Leadworx says "Code 4 has become the standard choice for general flashing work". Code 5 is 2.24 mm and 25.40 kg per square metre, listed as general, vertical and pitched, and the codes above it run to heavier duty. A chimney stack, a valley and a parapet gutter are different details, and the specification sets the code for each one. Lead on a roof is cut and dressed to each detail, so a stack and a valley will not share a code by default.

MyJobQuote says correctly installed lead flashing "can last for over 80 years", and gives over 100 years for the higher codes. Lead that is failing at an Ormesby stack can show itself at the upstand, the step flashings or the soakers, and the survey reads those joints and the mortar that holds them before a repair or a replacement is recommended. A patch is judged against a full renewal on what the lead and the mortar show.

Lead terms at a chimney

  • Code 41.80 mm lead, a general flashing code.
  • SoakerA lead piece slotted beneath tiles beside a wall.
  • UpstandThe part of the flashing turned up the wall.

How long should the covering on an Ormesby roof last?

The short answer

Published figures vary by material and source, and none is a promise. The survey reads the roof itself, from fixings to the lead at each junction.

HomeBuilding, last updated 30 September 2025, gives approximate lifespans: Welsh slate 100+ years, Spanish slate 75-100, reclaimed Welsh slate 50-80, clay tiles 60-80 and plain concrete tiles 40-50. For clay, Marley adds that the BRE determined a minimum life expectancy of 60 years. Marley expects roof tiles to last for around 60 years, as an expectation and not a promise. Sources do not agree on every material, so each figure here carries its source's name. Age alone is a poor guide.

On concrete the figures part company: HomeBuilding gives plain concrete 40-50 years, and Marley's own figure is around 60. VMZinc, the maker, says a zinc roof correctly designed and installed "can last in excess of 100 years". Each is a publisher's number for a material, not a promise about a particular house in Ormesby, and none of them reads the roof in front of you.

What decides a real roof's remaining life is its condition: fixings, battens, underlay and the lead at each junction. A covering past the middle of its published range can still be sound, and a young one can fail early where water has been getting in. The survey therefore describes the roof's state in plain words, and the written quote that follows reflects what was found, with nothing guessed from the ground. Fixings and underlay in particular give little warning from the ground.

Myth

A roof's age tells you exactly how much life it has left.

Fact

Published lifespans are ranges by material; the survey judges the roof itself.

Ormesby roofs: lead, slate, gutters and complaints

What does chimney lead repair cost at an Ormesby house?

MyJobQuote (22 September 2026) gives around £200 for a patch repair to chimney lead flashing and around £570 for a full replacement, and says a full leadwork replacement costs between £350 and £920, depending largely on whether scaffolding is required. All of this applies to chimney leadwork alone. Our lead roofing page covers other details such as valleys and bays.

What does a slate roof cost for an Ormesby house?

MyJobQuote says the average cost of fitting a slate roof is around £7,800 (6 October 2026), and HomeBuilding (30 September 2025) suggests a Welsh slate roof on a standard three-bedroom semi might reach £18,000. Those two figures come from different sources and describe different property sizes, so neither is a quote for Ormesby. Our slate roofing page explains the options. A slate roof is judged on its own fixings and battens, and the covering is only part of the picture.

Gutters at my Ormesby house overflow: what might that cost?

Which? Trusted Traders give £75 to £350 for clearing every gutter on both the front and rear of a house, excluding VAT, in November 2025. MyJobQuote's average for replacing guttering is around £1,000 to £1,600. A sagging run can be checked against Brett Martin's fall of 1mm for every 600mm. Our guttering page has more. The survey looks at the outlets, joints and falls before any figure is considered.

Can a photo of my Ormesby roof go to you before a visit?

Yes. Send it on WhatsApp to 07880 284133 with your road and a short note of the problem, a stain or a missing tile for instance. Our reply covers what can be judged from the image and what cannot. The loft is the only place to judge the underlay, battens and rafters, so the full survey still follows, whatever the photo suggests.

Poor roofing work at my Ormesby house: where do I stand?

The Consumer Rights Act 2015 requires "Service to be performed with reasonable care and skill". The Citizens Advice consumer helpline, 0808 223 1133, advises individuals and can pass information on to Trading Standards, which does not advise individuals itself. Keep the written quote, the photos and any messages together, in date order, so that the history of the job is easy to follow if a problem arises.

Price your Ormesby roof

Tell us about your roof

10-year workmanship guarantee, in writing

Call WhatsApp Written quote