Who checks a Hevingham re-roof, and against what test?
The short answer
CNC Building Control, or a registered approver. A whole new covering falls outside the Planning Portal's no-application test, while a small patch repair normally stays inside it.
Hevingham falls within the area of CNC Building Control, a partnership of five councils (South Norfolk, Norwich City, Broadland, King's Lynn & West Norfolk and Fenland). Its Norwich office is the one serving the east, and its building control line is 0808 168 5041, and a registered approver can be used instead. Either way, the starting point is the Planning Portal's test: no application is normally needed if "Less than 25 per cent of the total 'building envelope'" and "Less than 50 per cent of the roof is affected".
Lifting the covering from every slope reaches beyond half the roof, so a complete re-roof in Hevingham goes to building control before the first batten is touched, whatever the new tiles or slates are made of. Extra weight is a separate trigger: a covering "15 per cent or more" heavier than the one it replaces needs approval, and the Portal points owners to a structural engineer or surveyor. For that reason the survey goes up into the loft, where rafters, purlins and wall plates can be seen from underneath.
CNC's easy guide to roof insulation says of a warm roof "No ventilation is required for these types of roofs." and of a cold roof "Ventilation is required for these roofs." The building regulations may also apply, in CNC's FAQ wording, where repair work is significant or the building is thatched. Minor jobs are set out on our roof repairs page, full replacements on roof replacement.
Read during the Hevingham loft visit
- Underside of the covering, for daylight or damp
- Rafters and purlins, for movement or rot
- Wall plates where the roof sits on the walls
- Underlay and battens behind the covering
- Insulation depth, and warm-roof or cold-roof build-up


