Which office signs off a full re-roof in Hellesdon?
The short answer
CNC Building Control covers Hellesdon, and a whole new covering goes to it first. A smaller repair normally needs no application if it stays inside both Planning Portal limits.
Building control for a Hellesdon address belongs to CNC Building Control, a partnership of five councils (South Norfolk, Norwich City, Broadland, King's Lynn & West Norfolk and Fenland), which handles this side of the county through its Norwich office on 0808 168 5041. A registered building control approver is the other route. Whichever you choose, the Planning Portal test for a re-roof applies: no application is normally needed where "Less than 25 per cent of the total 'building envelope'" is affected and "Less than 50 per cent of the roof is affected".
Strip a Hellesdon house to its battens and the job goes beyond the 50 per cent limit, whatever covering comes next, so a full re-roof is put to building control before the first batten comes up. Weight is a separate trigger. A new covering "15 per cent or more" heavier than the old one needs approval, and the Planning Portal advises a structural engineer or surveyor to look first. Beneath the covering, the survey also looks at the rafters, purlins and wall plates that carry the tiles.
CNC's repairs guidance carries a warning of its own: "If the repair work is significant, or the building is thatched then the Building Regulations may apply." A small fix that stays inside both limits sits with our roof repairs service. Stripping and recovering belongs under roof replacement, where the building control step comes before the old covering is lifted, so the roof's condition is checked at the survey first.
What a Hellesdon re-roof survey reads
- Covering: tiles or slates that are slipped, split or missing
- Ridge and hip lines, and the joints along them
- Verges and valleys at the roof edges
- Flashings where slope meets wall or stack
- Roof timbers and underlay, viewed from inside the loft
- Eaves gutters and the downpipes that drain them


