How does a Reydon roof's exposure shape the way it is fixed?
The short answer
Fixings are calculated for the site's exposure under BS 5534, a code of practice that sets minimums rather than a one-size answer.
Reydon sits near the coast, so the exposure of each roof is weighed when a covering is specified. In Marley's guidance, a fixing specification written for the individual site supersedes the generic BS 5534 minimums, and it weighs exposure together with the local topography. The specification belongs to the roof in front of the surveyor, never to a postcode, and a Reydon survey reads the roof that is actually there.
BS 5534 is a code of practice, and Marley states that installing to it "isn't required by law". Its 2015 amendments made one thing clear: mortar "could no longer be relied upon as the only means of securing the roof covering". For ridges and hips, Marley expects mechanical fixing against the calculated wind uplift, and BS 8612:2018 is the standard behind dry-fix ridge, hip and verge parts.
Land is a separate matter from the roof. GOV.UK's coastal erosion map shows the estimated risk for an area under the current Shoreline Management Plans, and an owner can look a Reydon street up there. It describes ground rather than roofing, so it sits beside the fixing specification and does not replace it. Where a roof has already been damaged and needs securing, our emergency roof repairs page explains the make-safe work. Fixings are one of the parts the survey reads on the roof, along with underlay and battens, and the written figure follows from what the survey turns up.
From exposure to a fixing specification
- Note the roof's position and the local topography
- Work out the wind uplift the covering must resist
- Set fixings for tiles, ridge, hip and verge
- Write the specification down against BS 5534


