What does CNC Building Control ask of a Thurton re-roof?
The short answer
A whole re-roof goes past the Planning Portal's 50 per cent limit and so is a building control matter. A thatched building needs a word with CNC even for repairs.
Building regulations for Thurton are the business of CNC Building Control, a partnership of five councils (South Norfolk, Norwich City, Broadland, King's Lynn & West Norfolk and Fenland) which answers Thurton enquiries from Norwich on 0808 168 5041. A registered building control approver is the other route. In regulations South Norfolk Council has no part, though it does decide planning for the village, so an owner needs both answers.
The Planning Portal's test sets two limits: no application is normally needed where "Less than 25 per cent of the total 'building envelope'" is affected and "Less than 50 per cent of the roof is affected". Both must hold. Stripping and recovering a whole Thurton roof breaks the second one whatever material goes back, so the job needs building control approval ahead of any stripping. A repair to a few slates stays well inside both limits.
CNC's own wording is that "If the repair work is significant, or the building is thatched then the Building Regulations may apply." A thatched house at Thurton would therefore ring CNC first, even for a repair. Its easy guide to roofs also separates warm roofs, which need no ventilation, from cold roofs, which do. Which one your roof is can only be told from inside the loft, so that is where the survey starts. The survey notes which it is, so any ventilation question is answered before a covering is specified.
What building control weighs on a re-roof
- Share of the roof the work affects
- How much of the building envelope is affected
- Whether the new covering is much heavier
- Warm roof or cold roof, and its ventilation


