How are Corton tiles fixed against exposure to the sea wind?
The short answer
Fixings are calculated for the site's exposure under BS 5534. A fixing specification written for the roof replaces any blanket rule, and mortar alone is no longer relied on.
Corton is a coastal village, which is why exposure belongs in the conversation. BS 5534 is the code for slating and tiling, and Marley, a tile maker, says a Fixing Specification, written for each site, replaces those minimums, and one of its inputs is how exposed the roof is. At Corton, fixings are calculated for the site's exposure under BS 5534.
Marley also says installing to BS 5534 "isn't required by law". It adds that ridge or hip tiles should be mechanically fixed to resist the calculated wind uplift force, and that mortar "could no longer be relied upon as the only means of securing the roof covering". BS 8612:2018 covers ridge, hip and verge systems fixed dry, so on a re-cover those edges are fixed as well as bedded, and the fixings are chosen for the roof in front of us.
A second coastal point is erosion. GOV.UK's coastal erosion map shows the estimated risk for an area under the current Shoreline Management Plans, and it is worth a look before a larger project. It describes an area, not a house, in the same way the flood service does. For a roof facing the wind off the sea, the specification does the work and the survey supplies its inputs, from pitch and batten condition to the way the ridge is held.
What the Corton survey records
- Pitch and length of each slope
- Condition of battens under the covering
- How ridge and hip tiles are held
- Verge fixings and the cement or dry-fix edge
- Flashings at chimneys and walls


